COMPLIANCE INFO 2002 - 2006 - Laserfiche WebLink

Home Browse Search

Page 5 of 7 7. UNDEx-DISPENSER CONTAINMENT C TESTING Test Method Developed By: ❑UDC Manufacturer X Industry Standard ❑Professional Engineer ❑Other(Specify) Test Method Used: ❑Pressure ❑Vacuum X Hydrostatic ❑Other(Spec) Test Equipment Used: Incon TS STS Equipment Resolution: UDC#3-10 UDC#1,2 UDC# UDC# UDC Manufacturer: Owens Coming Environ UDC Material: Fiberglass Fiberglass UDC Depth: 31" Height from UDC Bottom to Top 10" of Highest Piping Penetration: Height from UDC Bottom to 4" Lowest Electrical Penetration: Condition of UDC prior to Clean testing: Portion of UDC Tested Full Does turbine shut down when UDC sensor detects liquid(both X Yes ❑No ❑NA X Yes ❑No ❑NA ❑Yes ❑No [INA ❑Yes ❑No [INA product and water)'? Turbine shutdown response time 2 Seconds 2 Seconds Is system programmed for fail- safe shutdown?` X Yes ❑No ❑NA X Yes ❑No [INA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA Was fail-safe verified to be X Yes ❑No ❑NA X Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA operational?* Wait time between applying No test 15 minutes pressure/vacuum/water and starting test Test Start Time: 1:56 pm Initial Reading(Rj): 1.2385' Test End Time: 2:11 pm Final Reading(RF): 1.2552" Test Duration: 15 minutes Chane in Reading(RF-RI): .0167"increase Pass/Fail Threshold or Criteria: Loss<.002"=pass Test Result: ❑ Pass ❑Fail X Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail Was sensor removed for testing? ❑Yes ❑No ❑NA X Yes ❑No ❑NA ❑Yes ❑No ❑NA ❑Yes ❑No ❑NA Was sensor properly replaced and verified functional after testin ? ❑Yes ❑No ❑NA X Yes ❑No [INA ❑Yes ❑No ❑NA ❑Yes ❑No 11NA Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) Test boots need to be renaird on the secondary in order to test If the entire depth of the UDC is not tested,specify how much was tested. If the answer to aM of the questions indicated with an asterisk(*)is"NO"or"NA",the entire UDC must be tested. (See SWRCB LG-160)