Laserfiche WebLink
Spill Prevention, Control and Countermeasure Plan <br /> Tesla Treatment Facility Page 21 of 45 <br /> ® Weather conditions and forecasted. <br /> ® Description of the terrain and at risk streams, sewers or other facilities. <br /> 2.5 Spill Response Procedures [40 CFR§112.7(a)(5)] <br /> This section provides the steps to be taken by facility operators in the event of a discharge or spill. <br /> Spill response can be summarized by the following sequence: <br /> DISCOVER-EVALUATE-NOTIFY-CONTAIN-CLEANUP-REPORT <br /> By following these procedures, most spills can be contained to the facility and prevented from <br /> adversely impacting human health and the environment. <br /> 2.5.1 Spill Discovery and Evaluation <br /> A discharge or spill can occur at any time and be discovered by anyone at the facility. Discharge <br /> response begins with the facility operator at the time of discovery. Upon discovery, the facility <br /> operator will assess the following: <br /> • Volume and extent of the discharge. <br /> • Whether or not there is an immediate threat to human health. <br /> • Whether or not the discharge has entered or will enter the storm drain system or impact a <br /> nearby surface water body. <br /> • Whether or not the source of the discharge can be stopped immediately. <br /> If simply closing a valve or switching off a pump can stop and contain the discharge, this will be <br /> the next step for the person who discovers the discharge. This action will only be taken for <br /> discharges that do not present an immediate health hazard. For discharges where human health is <br /> at risk, all personnel will be evacuated from the discharge area and emergency response personnel <br /> will manage the discharge response effort area. <br /> 2.5.2 Immediate Response <br /> Where there is an immediate risk that the discharge or spill will enter a storm drain or ditch, the <br /> facility operator should immediately place sorbent materials on and around the discharge and place <br /> containment devices designed to prevent the discharge from migrating towards or entering a storm <br /> water inlet. Once containment is achieved,the Chief Stationary Engineer should be contacted and <br /> informed of the situation. For any discharge that does not pose an immediate risk to drainage <br /> ditches or storm drains,and does not pose a threat of off-site impact,the Chief Stationary Engineer <br /> should be contacted before cleanup or further action. <br />