Laserfiche WebLink
FILL RISER CONTAINMENT SUMP TESTING <br />Facility is Not Equipped With Fill Riser Containment Sumps <br />Fill Riser Containment Sumps are Present, but were Not Tested ❑ <br />Test Method Developed By: ❑ Sump Manufacturer ❑ Industry Standard ❑ Professional Engineer <br />❑ Other (Specify) <br />Test Method Used: ❑ Pressure ❑ Vacuum ❑ Hydrostatic <br />❑ Other (Specify) <br />Test Equipment Used: Equipment Resolution: <br />>. Fill Sump # <br />Fill Sump # <br />Fill Sump # <br />Fill Sump # <br />Sump Diameter: <br />Sump Depth: <br />Height from Tank Top to Top <br />of Highest Piping Penetration: <br />Height from Tank Top to <br />Lowest Electrical Penetration: <br />Condition of sump prior to <br />-testing: <br />Portion of Sump Tested <br />-Sump Material: <br />Wait time between applying <br />pressure/vacuum/water and <br />startin test: <br />Test Start Time: <br />Initial Reading (R,): <br />Test End Time: <br />Final Reading (Rd: <br />Test Duration: <br />Change in Reading (RF -R,): <br />Pass/Fail Threshold or Criteria: <br />Test Result: ❑ Pass Fail <br />El Pass <br />Fail <br />Pass <br />Fail <br />Pass <br />Fail <br />Is there a sensor in the sump?. ❑Yes ❑No <br />❑Yes ❑No <br />❑Yes ❑No <br />❑Yes ❑No <br />Does the sensor alarm when <br />either product or water is ❑Yes ❑No ❑N/A <br />detected? <br />❑Yes [-]No ❑N/A <br />❑Yes [-]No ❑N/A <br />❑Yes [-]No ❑N/ <br />Was sensor removed for [-]Yes ❑No ❑N/A <br />testing? <br />❑Yes ❑No ❑N/A <br />❑Yes ❑No [IN/—A <br />❑Yes ❑No ❑N/ <br />Was sensor properly replaced ❑Yes ❑No ❑N/A <br />and verified functional after <br />testing? <br />❑Yes ❑No ❑N/A <br />❑Yes ❑No ❑N/A <br />❑Yes ❑No ❑N/ <br />Comments - (include information on repairs made prior to testing, and recommended follow-up for <br />failed tests) <br />