SU0011184 - Laserfiche WebLink

Home Browse Search

1. A building permit for each separate structure or building is required. Submit plans, specifications and supporting calculations, prepared by a Registered Design Professional (architect or engineer) for each structure or building, showing compliance with the 2016 California Building, Existing Building, Mechanical, Plumbing, Electrical, Energy and Fire Codes as may be applicable. 2. The required plans must be complete at the time of submittal for a building permit. Plans must address building design and construction, fire and life safety requirements, accessibility and show compliance with the current California codes and San Joaquin County ordinances. A complete set of plans must include fire sprinkler plans, truss design submittals, metal building shop drawings, structural plans and calculations, plumbing, electrical and mechanical drawings as well as structural calculations. 3. A grading permit will be required for this project. Submit plans and grading calculations, including a statement of the estimated quantities of excavation and fill, prepared by a Registered Design Professional. The grading plan shall show the existing grade and finished grade in contour intervals of sufficient clarity to indicate the nature and extent of the work and show in detail that it complies with the requirements of the code. The plans shall show the existing grade on adjoining properties in sufficient detail to identify how grade changes will conform to the requirements of the code. 4. A soils report is required pursuant to Section 1803 for foundations and CBC appendix Section J104 for grading of the CBC. All recommendations of the Soils Report shall be incorporated into the construction drawings. 5. Provide the following information on the plans, for each proposed building: a. Description of proposed use b. Existing and proposed Occupancy Groups c. Type of construction d. Sprinklers(Yes or No) e. Number of stories f. Building height g. Allowable floor area h. Proposed floor area L Occupant load based on the CBC for the new use 6. Based on our records the existing building proposed for use as a new production and barrel storage facility will be a change in occupancy. The building was previously constructed and permitted as group U Agricultural building. A change in occupancy will require a code analysis report and necessary plans prepared by an architect or engineer in accordance with Section 407 of the California Existing Building Code. He report and plans shall identify existing conditions, and propose alterations necessary to bring the building in compliance with the current code. 7. Modifications to existing buildings are required to include upgrades related to disability access pursuant to Section 410 of the California Existing Building Code. Plans showing these upgrades must be prepared by a registered engineer or licensed architect and shall be submitted for review and approval prior to issuance of a building permit. 8. Accessible routes shall be provided per CBC Section 11B-206. At least one accessible route shall be provided within the site from accessible parking spaces and accessible passenger loading zones; public streets and sidewalks; and public transportation stops to the accessible building or facility entrance they serve. Where more than one route is provided, all routes must be accessible. §11 B-206.2.1 PA-1600200 (SA) Conditions of Approval 3