WORK PLANS - Laserfiche WebLink

Home Browse Search

i 0 month, dd is the number of the day and yy or yyyy is the number of the year. The second value is the time measurement, in the format of hh:mm:ss, where hh is the hour, mm are the minutes and ss are the seconds. Hours should be calculated on a 24-hour basis, i.e. 6 PM is entered as 18:00:00. Seconds are optional. The third value is the well head injection pressure in psi. The fourth column is injection rate in gallons per minute. (b) Calibration and Maintenance of Equipment All monitoring and recording equipment shall be calibrated and maintained on a regular basis to ensure proper working order of all equipment. 4. Recordkeeping The Permittee shall retain the following records and shall have them available at all times for examination by an EPA inspector: (a) All monitoring information, including required observations, calibration and maintenance records, recordings for continuous monitoring instrumentation, copies of all reports required by this permit, and records of all data used to complete the permit application; (b) Information on the nature and composition of all injected fluids; (c) Results of the injectate "Hazardous Waste Determination" according to 40 CFR §262.11. Analyses results shall demonstrate that the injectate does not meet the definition of hazardous waste as defined in 40 CFR §261; and (d) Records and results of MITs, any other tests required by EPA, and any well workovers completed. (e) The Permittee shall maintain copies (or originals) of all records described in paragraphs (a) through (d) above during the operating life of the well and shall make such records available at all times for inspection at the facility. (f) The Permittee shall only discard the records described in paragraphs (a) through (d) if: (i) the records are either delivered to the Regional Administrator, or (ii) written approval from the Regional Administrator to discard the records is obtained. FINAL UIC Pennit CA10910003 Page 20 of 29