Laserfiche WebLink
Installing the System In-Line Check Valve Installation (For Red Jacket, Tokheim, or Bennett Pumps) <br /> Pump Port Strainer <br /> IIump Port <br /> ® O <br /> Pressure <br /> Port <br /> pikNoortsim.eps <br /> Figure 5. Pump Port Strainer Installation <br /> In-Line Check Valve Installation <br /> ( For Red Jacket, Tokheim, or Bennett Pumps) <br /> The in-line check valve is for use with Red Jacket,Tokheim,or Bennett submersible <br /> pumps installed in containment sumps. It installs into the pump output port,providing <br /> the same leak detection technology as the SwiftCheck Valve. <br /> L; 1. Make sure that AC power to the submersible pump and TLS--350 or TLS-350R sys- <br /> tem is turned off. <br /> 2. If this is a new installation where no piping currently exists,go to Step 3. In <br /> existing systems where piping is currently installed: <br /> a. Close the shutoff valve(if installed) in the manhole to prevent fuel from <br /> draining back from the dispenser. <br /> 576013-902,Revision G 19 <br />