Laserfiche WebLink
BRITTLE FRACTURE EVALUATION (40 CFR 112.7(1)) <br /> The ASTs present at the Facility were not field constructed. Therefore, no brittle fracture evaluation is <br /> required. <br /> CONFORMANCE WITH STATE AND LOCAL APPLICABLE REQUIREMENTS (40 CFR <br /> 112.70)) <br /> All bulk storage tanks at this Facility are registered with the state and local authorities and have current <br /> certificates of registration and special use permits required by the local fire code. <br /> OIL-FILLED OPERATIONAL EQUIPMENT (40 CFR 112.7(k)) <br /> No oil-filled operational equipment is present at the Facility. <br /> ROUTINE HANDLING OF PRODUCTS (40 CFR 112.7(a)(3)(11)) <br /> Routine handling and transfer of petroleum products at this Facility include: <br /> • Transfer of oil products between the ASTs and tanker trucks in the transfer areas. <br /> • Transfer of oil products to and from drums. <br /> • Movement of totes and drum containers at the Facility; and <br /> • Transfer of oil products by customer from the ASTs to customer's vehicles in the dispensing <br /> area. <br /> With the exception of transferring fuel into customer's vehicles, routine handling of products is only <br /> performed by Facility employees that have been trained to handle and transfer oil products. During <br /> loading/unloading of vehicles, the driver is required to stay with the truck at all times. Drivers are <br /> instructed to do the following during the handling of any products: <br /> • Check all hoses and containers for leaks <br /> • Ensure that the vehicle wheels have been chocked <br /> • Stay with the vehicle at all times <br /> • Verify all connections are properly seated prior to beginning transfer operations <br /> • Verify that the tank or truck has sufficient free volume for the transfer <br /> • Periodically inspect all hoses and connections for leaks during transfer activities <br /> • Ensure that truck engines remain off during transfer operations <br /> • Have a second person monitor the liquid level in the receiving container during transfer <br /> operations <br /> • When the transfer is complete, ensure that the transfer has been stopped and close all valves <br /> before disconnecting hoses <br /> • Remove chocks from wheels before departure <br /> Joe's Travel Plaza <br /> 15600 Harlan Road,Lathrop,CA <br /> Page 23 <br />