Laserfiche WebLink
c <br /> i� <br /> i <br /> SIERRA <br /> SES STANDARD OPERATING PROCEDURE <br /> LOGGING METHOD <br /> Unconsolidated soil'is classified and described by trained SES field personnel. All available <br /> information is used, including the following: soil recovered in the sampler, including the soil <br /> visible on both ends of the sample retained for possible analysis; soil cuttings generated during <br /> drilling; and the drilling contractor's observations of the drill rig's behavior. <br /> Classification and description of unconsolidated soil is accomplished using the American <br /> Society of Testing and Materials (ASTM) Methods D2487-85 (Unified Soil Classification System <br /> (USCS)) and/or D2488-69 (Description and Identification of Soils (Visual-Manual Procedure)). <br /> The soil classification and description is recorded on the field log sheet by SES field <br /> personnel and includes the following information: <br /> 1) Soil type; <br /> 2) Soil classification: <br /> 3) Soil color, including mottling; <br /> 4) Moisture content; <br /> 5) Plasticity and consistency(fine-grained material)or density(coarse-grained <br /> material); <br /> 6) Percentages of clay, silt, sand and gravel; <br /> 7) Grain size range of sands and gravels; <br /> 8) Angularity and largest diameter of gravel component; <br /> 9) Estimated permeability; <br /> 10) Odor; and <br /> 11) Any other observations which would assist in the interpretation of the <br /> depositional environment and/or differentiation between the various <br /> geologic units expected to be encountered. <br /> In addition to the above,the ground water levels encountered during drilling and measured <br /> after the water stabilized is also recorded on the field log. <br />