Laserfiche WebLink
1 B. Underground warning tape shall be as manufactured by Seton Name Plate Corporation, <br /> 2 New Haven, CT; W.H. Brady Company, Milwaukee, WI; or equal. <br /> 3 <br /> 5 PART 3: EXECUTION <br /> 6 <br /> 7 3.01 MOUNTING SAFETY AND CHEMICAL SIGNS <br /> 8 <br /> 9 A. Install the signs at the locations designated by the Engineer. <br /> 10 <br /> 11 B. Mount signs with top of the sign 5'-6" above the floor. <br /> 12 <br /> 13 C. Secure with No. 10 stainless steel screws, providing expansion shields for concrete. <br /> 14 <br /> 15 <br /> 16 3.02 MOUNTING ROOM IDENTIFICATION SIGNS <br /> 1 <br /> 168 <br /> A. Mount on doors, centered between jambs, and top of signs 5'-6" above the floor. <br /> 19 <br /> 20 B. Attach with 1/16" thick white vinyl foam tape. <br /> 21 <br /> 22 3.03 MOUNTING BUILDING EXTERIOR LETTERING <br /> 23 <br /> ' 24 A. Mount where indicated on Drawings. <br /> 25 <br /> 26 B. Attach to wall using 3/4" shims. <br /> 2 <br /> 2 <br /> 8 3.04 IDENTIFYING DEVICES FOR PIPING AND VALVES <br /> 29 <br /> 30 A. Piping: Identify all piping at approximately 10-foot centers and in general, at each valve and <br /> 31 piece of equipment, but not less than once in each room whether or not concealed. <br /> 32 <br /> 33 B. Install valve tags on all process and main utility valves. Tags are not required on hose bibs, <br /> 34 faucets, and similar applications. Attach tags to handwheel or stem using stainless steel <br /> 35 beaded chain or cable. <br /> 36 <br /> ' 37 3.05 UNDERGROUND WARNING TAPE <br /> 38 <br /> 39 A single line of tape as specified in this section shall be provided above the centerline of <br /> 40 all buried pipe and conduit. Unless shown otherwise on the drawings, tape shall be <br /> 41 installed 6-inches below finished grade. Tape shall be laid flat with message side up before <br /> 42 backfilling. <br /> 43 <br /> 44 <br /> 45 <br /> 46 <br /> 47 END OF SECTION <br /> IDENTIFYING DEVICES <br /> 050694 10400-5 <br />