Laserfiche WebLink
5. Time delay relays(TR)shall be solid state plug-in relays with a timer adjustable over the <br /> range 1 second to 3 minutes unless other ranges are indicated or required. Provide LED <br /> timer energized indicator lamp. Sockets for plug-in timers shall be standard industrial <br /> type octal 8 or 11 pin with barriered pressure screw terminals. Time delay relays shall be <br /> IDEC RTE, SSAC TD, or approved equal. <br /> D. INDICATING LIGHTS <br /> 1. Indicating Lights (IL) for general purpose applications shall be water and oil tight as <br /> defined by NEMA 13, corrosion resistant as defined by NEMA ICS 6-110.58, U.L. <br /> listed, full voltage (unless shown otherwise), standard 30 mm diameter, with round <br /> plastic lens and miniature bayonet lamp base. Indication lights shall be Westinghouse <br /> PB2, IDEC, or approved equal. <br /> I2. Manufacturer's standard legend plates shall be provided. <br /> ' 3. Indicating light type and color of lens shall be as shown on the Drawings or specified in <br /> the Contract documents. <br /> ' 4. Indicating lights designated "PTT" shall be provided with a push-to-test switch and <br /> wiring. <br /> E. ELAPSED TIME METERS <br /> Elapsed time meters (ETM)for general use shall be nonresettable with 0.0 to 99,999.9 hour <br /> readout, permanently lubricated synchronous motor drive, nominal TV x 1"H rectangular <br /> two hole surface mount housing, screw terminals, and rated at 120 VAC, 60 Hz. Elapsed time <br /> meters shall be Veeder-Root 779536, Stemco-Engler Series 711, or approved equal. <br /> 1 F. CIRCUIT BREAKERS <br /> 1. Circuit breakers shall be of the indicating type, providing ON, OFF and TRIPPED <br /> positions of the operating handle. Circuit breakers shall be quick-make, quick-break, <br /> with a thermal-magnetic action, except when protecting motor feeders where motor <br /> circuit protector (MCP) breakers with adjustable magnetic trip shall be used. Circuit <br /> breakers shall be the bolted on type. The use of tandem or dual circuit breakers in a <br /> ' normal single-pole space to provide the number of poles or spaces specified are not <br /> acceptable. All multiple-pole circuit breakers shall be designed so that an overload on <br /> one pole automatically causes all poles to open. Circuit breakers and motor circuit <br /> protectors shall be manufactured by Westinghouse, G.E., ITE, or approved equal. <br /> ELECTRICAL <br /> 16000 - 19 <br /> i <br />