ARCHIVED REPORTS - Laserfiche WebLink

Home Browse Search

i 1 qualified persons who shall instruct the Owner's personnel in the operation and care 2 thereof. Instruction shall include step-by-step troubleshooting procedures with all necessary a test equipment. All manufacturer's instructions shall be provided in writing. 4 5 During the performance tests data shall be taken and recorded to demonstrate that all 6 equipment and systems comply with manufacturer's submitted data and other requirements 7 of the contract. 8 9 If under test, any portion of the work shall fail to fulfill the contract requirements and is 10 altered, renewed or replaced, tests on that portion when so altered, removed or replaced, 11 together with all other portions of the work as are affected thereby, shall, if so required by 12 the Engineer, be repeated within reasonable time and in accordance with the specified 13 conditions, and the Contractor shall pay to the Owner all reasonable expenses incurred by ' 14 the Owner as a result of the carrying out of such tests. 15 16 If any doubt, dispute or difference should arise between the Engineer and the Contractor 17 regarding the test results or the methods or equipment used in the carrying out of a test, 18 the Engineer may order the test to be repeated using modified methods or equipment. If 19 the repeat test substantially confirms the previous test all costs in connection with the 20 repeat test will be paid by the Owner, otherwise the costs shall be borne by the Contractor. 21 Where the results of any installed test fail to meet the contract requirements, repeat tests 22 to achieve the contract requirements shall be made at the Contractor's expense. 23 24 3.09 OPERATING AND MAINTENANCE INSTRUCTIONS 25 26 A. Before receiving payment for more than 85 percent of the work, the Contractor shall deliver 27 to the Engineer five sets of acceptable manufacturer's operating and maintenance 28 instructions covering each item of mechanical, electrical, and instrumentation equipment or 29 equipment assembly provided under this contract. 30 31 B. The operating and maintenance instruction shall include, as a minimum, the following data 32 for each item of mechanical, electrical and instrumentation equipment: 33 34 1. An itemized list of all data provided. 35 36 2. Name and location of the manufacturer, the manufacturer's local representative, the 37 nearest supplier and spare parts warehouse. 38 39 3. Accepted submittal information applicable to operation and maintenance. 40 41 4. Recommended installation, adjustment, start-up, calibration and troubleshooting 42 procedures. 43 44 5. Recommended lubrication and an estimate of yearly quantity needed. 45 46 6. Recommended step-by-step procedures for normal and emergency modes of operation, 47 including start-up, operation and shutdown. 48 as 7. Complete internal and connection wiring diagrams. 50 51 8. Recommended preventive maintenance procedures and schedule. 52 GENERAL CONSTRUCTION INFORMATION & REQUIREMENTS 051194 01010-5 1