WORK PLANS - Laserfiche WebLink

Home Browse Search

2. SCOPE OF WORK CKG will contract with Gregg Drilling,a C57 licensed drilling contractor to install the new MW-5 at its present location.The following bullets outline the elements necessary to complete the proposed work: • Obtain a SJDEH Permit for the well installation • Prepare a site-specific health and safety plan for the work. • Mobilize to the site to install the monitoring well. • Develop and survey the monitoring well. The following is a task breakdown of CKG's scope of work. Task 1 Permitting The SJDEH requires submittal of their"Site Mitigation Well and Boring Permit Application". Supporting documents require3d with the permit applications include a site-specific health and safety plan;their"Site Mitigation Master File Record Information Form"and this work plan,approved by the RWQCB. Copies of these document are provided in Appendix A. Task 2—Health and Safety Plan A health and safety plan will be prepared prior to initiating fieldwork. The health and safety plan will list potential hazards and protective measures required to protect the field investigation team,other persons on site,and the general public from site specific hazards(Appendix A). Task 3-Subsurface Utility Clearance Because the new MW-5 will be installed in the same borehole as the old MW-5,it will not be necessary to clear the borehole for subsurface utilities. Task 4—Well Installation CKG will work with Gregg Drilling to install the new MW-5 (MW-5R)to a depth of 85 feet which is approximately 10 feet deeper that the existing MW-5.The well will be constructed through 8-inch diameter hollow stem augurs.The well will be constructed of 2-inch diameter schedule 40 PVC with 20 feet of 0.02-inch screen from 65-85 feet below ground surface. Gregg Drilling will start by removing the flush mounted well head and drilling out the existing well. After all the will debris is cleared from the borehole the drillers will advance the hole to the new depth of 85 feet below ground surface.CKG Environmental,Inc.will log soil lithology from the deeper section of the well.Construction details for MW-5R are described on Plate 3. After the borehole has been drilled the well casing will be placed into the augurs and the sand pack material placed in the annular space around the screened interval. The sand pack will be placed by CKG Environmental,Inc. Page 2 November 3,2017 Well Installation Work Plan Owens-Brockway Tracy CA