SU0013350 - Laserfiche WebLink

Home Browse Search

Item No. 1 PC: 8-6-87 VR-86-5/UP-86-6 Page 20 ( 2 ) The proposed aluminum dome does not meet the require- ments set forth in Uniform Building Code Section 1806 for an unprotected roof system. In accordance with this Section, the roof must be constructed of heavy timber or noncombustible materials. The test data submitted for aluminum alloys do not qualify -as non- combustible under Uniform Building Code Section 415 . In addition, the building must be A2 . 1 , one story in height , the roof clearance must be less than 25 feet and cannot exceed 35 percent of the area, and the building must be fire sprinklered throughout to qualify under Section 1806. (3) All exiting requirements shall comply with Uniform Building Code Chapter 33 . The cross aisles and side exits as shown on the preliminary plan do not meet the requirements of Section 3316. b. A grading plan shall be submitted by the applicant , and it shall be approved and a grading permit issued by the Building Inspection Division prior to the performance of any excavation or filling of earth material : ( 1 ) The grading plan shall contain the information listed in the U.B.C. , Appendix, Chapter 70, Section 7006( 1 ) . (2 ) The grading plan shall include complete drainage details and elevations of the adjacent parcels. Retaining wall details shall be submitted where appli- cable. (3) All recommendations of the soils engineer shall be incorporated in the grading plans . (4) All compaction reports must be submitted prior to issuance of a building permit . c. The Development Plan shall indicate the following: (1 ) Provide parking for the physically handicapped. The space (s) shall be located as close as possible to the primary entrance (C.A.C. , Title 24) . ( 2) Provide identification signs for the parking space(s) ; include a "tow away" sign at each, or it must be visible from each space (C.A.C . , Title 24) . (3) The slope of a parking space shall not exceed 1/4 inch per foot (C.A.C. , Title 24) .