COMPLIANCE INFO_2006-2008 - Laserfiche WebLink

Home Browse Search

TEST NO.2 - FILL RISER CONTAEXWNT SUMP TESTING Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present, but were Not Tested ❑ Test Method Developed By: ❑ Sump Manufacturer ❑ Other (Specify) ® Industry Standard ❑ Professional Engineer Test Method Used: ❑ Pressure 0 Other (Spec) ❑ Vacuum El Hydrostatic - Test Equipment Used: Incon Tester Equipment Resolution: Fill Sump #87-1 Fill Sump #87-2 Fill Sump #87-3 Fill Sump #91 Sump Diameter: XXX Sump Depth: XXX Height from Tank Top to Top of Highest Piping Penetration: Height from Tank Top to Lowest Electrical Penetration: Condition of sump prior to testing: Portion of Sump Tested Sump Material: Fiberglass Fiberglass Fiber lass Fiberglass Wait time between applying pressure/vacuum/water and starting test: Per Protocol Test Start Time: 4:04pm 4:04pm 4:04 m 4:04pm Initial Reading (RI): 1.5539 3.4842 2.6005 2.5732 Test End Time: 4:19pm 4:19pm 4:20pm 4:20pm Final Reading F): 1.5537 3.4837 2.6005 2.5735 Test Duration: 15 min. 15 min. 16 min. 16 min. Change in Reading (RF -RI): -.0002 -.0005 none +.0003 Pass/Fail Threshold or Criteria: 3r Par Certified 3' Party Certified 3rdpa rty Certified 3r Party Certified Test Result.' 191Pass ❑ Fail IS] Pass ❑ Fail ® Pass ❑ Fail ® Pass ❑ Fail Is there a sensor in the sump? ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No Does the sensor alarm when either product or water is detected? ❑Yes ❑No ❑NA ❑Yes ❑No DNA ❑Yes ❑No DNA ❑Yes ❑No DNA Was sensor removed for testing? ❑ Yes ❑No DNA ❑ Yes ❑ No DNA ❑Yes ❑ No ❑ NA ❑ Yes ❑ No DNA Was sensor properly replaced and verified functional after testing2 ❑ Yes ❑No DNA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No DNA ❑ Yes ❑ No ❑NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) C!