Laserfiche WebLink
Ll <br />SWRCB, January 2002 <br />5. SECONDARY PIPE TESTING <br />v <br />Page of <br />Test Method Developed By: 0 Piping Manufacturer 0 Industry Standard 0 Professional Engineer <br />0 Other (Spec) <br />Test Method Used: 0 Pressure 0 Vacuum 0 Hydrostatic <br />0 Other (Spec) <br />Test Equipment Used: Mc Daniels / 3D test gauges — NIST Equipment Resolution: +/- 0.25% Is <br />Piping Run # 1 issue <br />Piping Run #2 reel Piping Run # <br />Piping Run # <br />Piping Material: Fiberglass <br />Fiberglass <br />Piping Manufacturer: AO Smith <br />AO Smith <br />Piping Diameter: 4" <br />4" <br />Length of Piping Run: 35 ` <br />25' <br />Product Stored: JP8 <br />JP8 <br />Method and location of <br />piping -run isolation: Sump <br />Sump <br />Wait time between applying <br />pressure/vacuum/water and 5 min <br />starting test: <br />5 min <br />Test Start Time: 0 <br />0 <br />Initial Reading (RI): 5.1 <br />5.1 <br />Test End Time: 60 <br />60 <br />Final Reading (RF): 5.1 <br />5.1 <br />Test Duration: 1 hour <br />I hour <br />Change in Reading (RF-Rj): 0.0 <br />0.0 <br />Pass/Fail Threshold or <br />Criteria: <br />Test Result: Pass <br />Pass ® Pass 0 Fail <br />0 Pass 0 Fail <br />Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />Renlaced test boots on all ends <br />