COMPLIANCE INFO_2012-2015 - Laserfiche WebLink

Home Browse Search

Page 4 of 7 3. PIPING SUMP TESTING Test Method Developed By: ❑Sump Manufacturer ®Industry Standard ❑Professional Engineer ❑Other(Specify) Test Method Used: ❑Pressure ❑vacuum ®Hydrostatic ❑Other(Spec) Test Equipment Used: See attached testing procedures Equipment Resolution: Sump#87 Sump# 91 Sump Diameter: 48" 48" Sump Depth: 71" 76" Sump Material&Manufacturer: Fiberglass Fiberglass Height from Tank Top to Top of 12" 12" Highest Piping Penetration: Height from Tank Top to Lowest 2799 27" Electrical Penetration: Condition of sump prior to testing: Fair Fair Portion of Sum Tested' Above highest Above highest Above highest Above highest Sump penetration penetration penetration penetration Does turbine shut down when sump sensor detects liquid(both ❑Yes®No®NA ❑Yes❑No®NA ❑Yes❑No®NA ❑Yes❑No®NA product and water)?" Turbine shutdown response time Is system programmed for fail-safe El Yes®No®NA ❑Yes❑No®NA ❑Yes❑No®NA ❑Yes❑No®NA shutdown?` Was fail-safe verified to be ® ® ❑ ® ❑ ❑ ® ®Yes❑No®NA operational?* El Yes No NA ❑Yes No NA Yes No NA Wait time between applying pressure/vacuum/water and starting 30 minutes 30 minutes 30 minutes 30 minutes test: Test Start Time: 9:22am 9:24am Initial Reading(RI): 2.5073 3.7632 Test End Time: 9:37am 9:44am Final Reading(RF): 2.5074 3.7646 Test Duration: 15 min 15 min Change in Reading(RF-RI): 0.00013 0.00134 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 Was sensor removed for testing? ®Yes❑No❑NA ®Yes❑No❑NA ❑Yes❑No❑NA ❑Yes❑No❑NA Was sensor properly replaced and ®Yes❑No[_1 NA ®Yes E]No[:1 NA [:]Yes[:1No[-]NA ❑Yes F1 No F1 NA verified functional after testin ? Comments— (include information on repairs made prior to testing,and recommended follow-up for failed tests) i If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)