COMPLIANCE INFO_2012-2015 - Laserfiche WebLink

Home Browse Search

Page 5 of 7 7. UNDER-DISPENSER CONTAINMENT UDC TESTING Test Method Developed By: ❑UDC Manufacturer ®Industry Standard ❑Professional Engineer ❑Other(Spec) Test Method Used: Q Pressure ❑Vacuum ®Hydrostatic ❑Other(Specify) Test Equipment Used: See attached testing procedures. Equipment Resolution: UDC#1/2 UDC#3/4 UDC#5/6 UDC#7/8 UDC Manufacturer: UDC Material: Fiberglass Fiberglass Fiberglass Fiberglass UDC Depth: 30" 30" 30" 30" Height from UDC Bottom to Top 8" 8" 8" 8" of Highest Piping Penetration: Height from UDC Bottom to 6" 6" 6" 6" Lowest Electrical Penetration: Condition of UDC prior to Fair Fair Fair Fair testing: Portion of UDC Tested Above highest Above highest Above highest Above highest penetration penetration penetration penetration Does turbine shut down when UDC sensor detects liquid(both ❑Yes ❑No®NA ❑Yes❑No®NA ❑Yes ❑No®NA ❑Yes ❑No®NA product and water)?' Turbine shutdown response time Is system programmed for fail- ❑ ❑ ® ❑yes❑No®NA ❑Yes ❑No®NA ❑Yes No NA safe shutdown?* Yes No NA ❑ Was fail-safe verified to be ®yes ❑No®NA ❑Yes❑No®NA ❑Yes ❑No®NA ❑Yes ❑No®NA operational?* Wait time between applying pressure/vacuum/water and 30 minutes 30 minutes 30 minutes 30 minutes starting test Test Start Time: 11:01am 11:01am 10:38am 10:38am Initial Reading(Ri): 1 5.0419 3.4340 1.1450 2.2655 Test End Time: 11:16am 11:16am 10:53am 10:53am Final Reading(RF): 5.0419 3.4340 1.1455 2.2655 Test Duration: 15 min 15 min 15 min 15 min Change in Reading(RF-RI): 0.00030 0.0 0.00051 0.00002 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 Was sensor removed for testing? ®Yes❑No❑NA ®Yes❑No❑NA ®Yes❑No❑NA ®Yes❑No❑NA Was sensor properly replaced and verified functional after testing? ®Yes❑No F1 NA ®Yes[-]No[—INA ®Yes[:]No[—]NA ®Yes[-]No❑NA 1 11 Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) 'If the entire depth of the UDC is not tested,specify how much was tested. If the answer to gAy of the questions indicated with an asterisk(*)is"NO"or"NA",the entire UDC must be tested. (See SWRCB LG-160)