COMPLIANCE INFO_2006-2009 - Laserfiche WebLink

Home Browse Search

°SWRCB,January 2002 Page 4 of 5 6.PIPING SUMP TESTING Test Method Developed by ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer ❑ Other(Specify) Test Method Used ❑ Pressure D Vacuum ® Hydrostatic ❑ Other(Specify) Test Equipment Used: Incon TS-STS Equipment Resolution: .0006 Sump#Piping Sump# Sump# Sump# #UE020U001 Sump Diameter 40" Sump Depth 45" Sump Material Fiberglass Height from Tank Top to Top of 14" Highest Piping Penetration Height from Tank Top to Lowest 14" Electrical Penetration Condition of sump prior to testing Good Portion of Sump Tested(1) 2"above highest pipe pent. Does turbine shut down when sump sensor detects liquid(both ❑ Yes ❑ No SNA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No [INA D Yes ❑ No ❑ NA product and water)?* Turbine shutdown response time N/A Is sytem programmed for fail-safe D Yes ❑ No S NA ❑ Yes ❑ No ❑ NA D Yes D No ❑ NA ❑ Yes ❑ No ❑ NA shutdown?* Was fail-safe verified to be ❑ yes ❑ No SNA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No DNA operational?* Wait time between applying pressure/vacuum/water and starting 30 Min. test Test Start Time 11:31 AM 11:50AM Initial Reading Ri) 5.9875" 5.9877' Test End Time 11:46 AM 12:06 PM Final Reading R 5.9877' 5.9877' Test Duration 15 MIN. 15 MIN. Change in Reading Rf-Ri +.0002" .0000 Pass/Fail Threshold or Criteria .002 Test Result S Pass ❑ Fail D Pass D Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? S Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and D Yes S No D NA ❑ Yes ❑ No ❑ NA D Yes D No ❑ NA ❑ Yes ❑ No D NA verified functional after testing? Comments include any information on repairs made prior to testing,and recommended follow-up for failed tests Re-Installed Sensor To Lowest Point But Not Tested. (1)If the entire depth of the sump is not tested,specify how much was tested.If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested.(See SWRCB LG-160)