COMPLIANCE INFO_2006-2009 - Laserfiche WebLink

Home Browse Search

' If the entire depth of the sump is not tested, specify how much was tested. If the answer to @ny of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160) SWRCB, January 2002 Page 4_ of _6_ 6. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard D Professional Engineer ❑ Other (Spec) Test Method Used: ❑ Pressure ❑ Vacuum ® Hydrostatic ❑ Other (Spec) Test Equipment Used: INCON TS -STS Equipment Resolution: .002 Sump #PIPING Sump # Sump # Sump # Sump Diameter: 36" Sump Depth: 50" Sump Material: FIBERGLASS Height from Tank Top to Top of 2119 Highest Piping Penetration: Height from Tank Top to Lowest 18" Electrical Penetration: Condition of sump prior to testing: GOOD 2" ABOVE SUMPS Portion of Sump Tested' HIGHEST PENETRATION Does turbine shut down when sump sensor detects liquid (both ❑ Yes ❑ No ®NA ❑ Yes D No ❑ NA ❑ Yes ❑ No DNA ❑ Yes D No D NA product and water)?' Turbine shutdown response time N/A Is system programmed# for fail-safe ❑ Yes ❑ No ®NA D Yes ❑ No DNA ❑ Yes ❑ No ❑ NA ❑ Yes D No ❑ NA shutdown? Was fail-safe verified to be ❑ Yes ❑ No ®NA D Yes D No ❑ NA ❑ Yes ❑ No DNA D Yes ❑ No ❑ NA operational?* Wait time between applying pressure/vacuum/water and starting 30 MINUTES test: Test Start Time: 10:43 11:00 Initial Reading (RI): 5.1418 5.1412 Test End Time: 10:59 11:15 1 Final Reading (RF): 5.1411 5.1409 Test Duration: 15 MIN 15 MIN Change in Reading (RF -RI): -.0007 -.0003 Pass/Fail Threshold or Criteria: .002 .002 Test Result: ® Pass ❑ Fail D Pass ❑ Fail ❑ Pass ❑ Fail D Pass ❑ Fail Was sensor removed for testing? ® Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No D NA Was sensor properly replaced and ®Yes D No DNA D Yes ❑ No DNA ❑ Yes D No ❑ NA ❑ Yes ❑ No D NA verified functional after testing? Comments — (include information on repairs made prior to testing and recommended follow-up for failed tests) The Piping Sump passed the hydrostatic test. No repairs are needed at present time. ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to @ny of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)