COMPLIANCE INFO_2009-2010 - Laserfiche WebLink

Home Browse Search

6. PIPING SUMP TESTING Test Method Developed By: ❑ Sump Manufacturer N Industry Standard ❑ Professional Engineer ❑ Other(Spec) Test Method Used: ❑ Pressure ❑Vacuum N Hydrostatic ❑ Other(Spec) Test Equipment Used: INCON SUMP TESTER Equipment Resolution: +1-0.002" Sump#87 Sump#91 Sump#DIESEL Sump#WASTE OIL Sump Diameter: 48" 48" 48" 48" Sump Depth: 74" 72.50" 80" 75" Sump Material: FIBERGLASS FIBERGLASS FIBERGLASS FIBERGLASS Height from Tank Top to Top of 23.50" 28" 22.50" 33" Highest Piping Penetration: Height from Tank Top to Lowest 36" 36" 41" 26" Electrical Penetration: Condition of sump prior to testing: DRY DRY DRY DRY Portion of Sump Tested' ABOVE ABOVE ABOVE ABOVE PENETRATION PENETRATION PENETRATION PENETRATION Does turbine shut down when sump sensor detects liquid(both N Yes [—]No ❑NA N Yes [:]No ❑NA N Yes [—]No ❑NA ❑Yes ❑No N NA product and water)?* Turbine shutdown response time 3 SEC 3 SEC 3 SEC N/A Is system programmed for fail-safe N Yes ❑No ❑NA N Yes [--]No ❑NA N Yes ❑No ❑NA ❑Yes ❑No N NA shutdown?* Was fail-safe verified to be operational?* ®Yes [__1No [INA N Yes [--]No ❑NA N Yes [INo F-1NA El Yes ❑No N NA Wait time between applying pressure/vacuum/water and starting 10 MIN 10 MIN 10 MIN 10 MIN test: Test Start Time: 9:26 AM 11:19 AM Initial Reading(Rj): 7.5157' 6.9008" Test End Time: 9:41 AM 11:34 AM Final Reading(RF): 7.5158" 6.9006" Test Duration: 15 MIN 15 MIN Change in Reading(RF-Ri): 0.0001" -0.0002" Pass/Fail Threshold or Criteria: +/-0.002" +/-0.002" Test Result: N Pass ❑Fail ❑Pass ❑ Fail ❑Pass ❑ Fail N Pass ❑Fail Was sensor removed for testing? N Yes ❑No [:INA ❑Yes [:]No N NA ❑Yes ❑No N NA N Yes [:]No ❑NA Was sensor properly replaced and verified functional after testing? ®Yes [:]No ❑NA [-]Yes ❑No N NA ❑Yes ❑No N NA N Yes [:]No ❑NA Comments— (include information on repairs made prior to testing, and recommended follow-up for failed tests) ABOVE IS THE LAST OF TWO BACK TO BACK 15 MINUTE TESTS 91 AND DIESEL STP SUMP NOT TESTED DUE TO SECONDARY LINES REPAIRS NEED TO BE MADE 1 If the entire depth of the sump is not tested,specify how much was tested. If the answer to aM of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)