COMPLIANCE INFO_2011-2015 - Laserfiche WebLink

Home Browse Search

SWRCB,January 2002 Page q of t 7. UNDER-DISPENSER CONTAINMENT UDC TESTING Test Method Developed By: 0 UDC Manufacturer 0 Industry Standard ❑Professional Engineer X Other(Spec) Incon Test Method Used: ❑Pressure ❑Vacuum X Hydrostatic Other(Spec) Test Equipment Used: Incon TS-STS Sump Test System Equipment Resolution: 0.002 MINEENNIONNOM UDC#9A UDC#9/10A UDC#10/I1A UDC# 11/12A UDC Manufacturer: Bravo Bravo Bravo Bravo UDC Material: Steel Steel Steel Steel UDC Depth: 12" 12" 12" 12" Height from UDC Bottom to Top of Highest Piping Penetration: Height from UDC Bottom to Lowest Electrical Penetration: Condition of UDC prior to Dirty Dirty Dirty Dirty testing: Portion of UDC Tested' 1/3 1/3 1/3 1/3 Does turbine shut down when UDC sensor detects liquid(both 1 0 Yes ❑No X NA 0 Yes 0 No X NA ❑Yes 0 No X NA ❑Yes ❑No X NA product and water)?* Turbine shutdown response time N/A N/A N/A N/A Is system programmed for fail- 0 Yes ❑No X NA 0 Yes 0 No X NA ❑Yes 0 No X NA ❑Yes ❑No X NA safe shutdown?* Was fail-safe verified to be 0 Yes 0 No X NA 0 Yes ❑No X NA 0 Yes 0 No X NA 0 Yes 0 No X NA operational?* Wait time between applying 5 min 5 min 5 min 5 min pressure/vacuum/water and starting test Test Start Time: 11:19 11;19 11:19 1:05 Initial Reading(RI): 0.1613 0.7970 0.0904 0.2301 Test End Time: 11:34 11:34 11:34 1:20 Final Reading(RF): 0.1604 0.7966 0.0901 0.2300 Test Duration: 15 min 15 min 15 min 15 min Change in Reading(RF-Ri): 0.0009 0.0004 0.0003 0.0001 Pass/Fail Threshold or Criteria: 0.002 0.002 0.002 0.002 y Test Result , <a :X Pass ❑F`aiY = X Pass, ,q,FaYIC.Pass„ CIa�l R= as a� , .� ,r Was sensor removed for testing? ❑ Yes ❑No X NA ❑ Yes ❑No X NA ❑ Yes ❑No X NA ❑ Yes ❑No X NA Was sensor properly replaced and ❑ Yes ❑No X NA ❑ Yes ❑No X NA ❑ Yes 0 No X NA ❑ Yes 0 No X NA verified functional after testin ? Comments—(include information on repairs made prior to testing, and recommended follow-up for ailed tests) ii FA MEMO 2015 _, 'If the entire depth of the UDC is not tested,specify how much was tested. If the answer to My of the questions indicated with an asterisk(*)is"NO"or"NA",the entire UDC must be tested. (See SWRCB LG-160)