Laserfiche WebLink
Seisnuc/Anchoring: <br />Tank anchorage is specifically designed for linear and crosstinked polyethylene tanks, and <br />consists of bolts or metal clips anchored to the concrete foundation pad, with cables running <br />between the clip and hold downs on the top of the tank These are designed by a civiUstructural <br />ew,tneenrig firm, and are; purchased from the tank manufacturer, Snyder Industries or Poly <br />Processing Co- The system for the wastewater cone bottom tank is shown in the attached signed <br />and stamped drawings. <br />Seismic/Anchoring findings: The tanks as designed and operated, and the containment areas in which <br />they are located, are adequately anchored and are seismically sound. <br />Initials: I , <br />Leak Tes'_ <br />A leak test was conducted by tilling the tanks with wastewater and inspcc ting for leaks. There <br />were no signs of leakage. <br />'}Panic ]integrity: Based on the fact that the tanks are new (purchased in 2016) and have contained <br />wastewater without signs of leakage, the tanks have sufficient integrity for their intended use. <br />lnitiais�((;L% <br />Tank Drawing: - - <br />tom�X/kc <br />tUA v3k �c C <br />rksf! ic`AtEz <br />Facing - - - - --- - --- <br />hi E S W <br />"Tank Diamc tees: 11 ft 10 in, 4 ft and 4 ft <br />Tank Height: 15 ft 3 in, 5 ft 7 in and 4 ft <br />Tank Gross Capacity: 8285 gallons <br />California Tank Lines, Inc. Wastewater Processing Tanks (3) <br />