Laserfiche WebLink
SWRCB,January 2002 FINAL DRAFT Page 3 of 4 <br /> 5. SECONDARY PIPE TESTING <br /> Test Method Developed By: ❑Piping Manufacturer ®Industry Standard ❑Professional Engineer <br /> ❑ Other(Spec) <br /> Test Method Used: ❑Pressure ®Vacuum ❑ Hydrostatic <br /> ❑Other(Specify) <br /> Test Equipment Used: Equipment Resolution: <br /> Test FAuipment Used: 0 to 30"hg Dial Gaye 2%a Mid Scale <br /> DIESEL Piping Run# Piping Run# Piping Run# <br /> FOS/FOR <br /> Piping Material: FRP <br /> Piping Manufacturer: Ameron <br /> Piping Diameter: 4" <br /> Length of Piping Run: 12' <br /> Product Stored: Diesel <br /> Method and location of Boot @ Sump. <br /> piping-run isolation: <br /> Wait time between applying <br /> pressureA,acuum/water and NA <br /> starting test: <br /> Test Start Time: NA <br /> Initial Reading(R): NA <br /> Test End Time: NA <br /> Final Reading(RF): NA <br /> Test Duration: NA <br /> Change in Reading(RF-R): NA <br /> Pass/Fail Threshold or 0.00"hg <br /> Criteria: <br /> Test Result ❑Pass ❑Fail ❑Pass ❑Fail ❑Pass ❑Fail ❑Pass [—]Fail <br /> Comments—(Include information on repairs made prior to testing, and recommended follow-up for failed tests.) <br /> 4"Ameron FRP piping over common Steel FOR and FOS piping. <br /> Test boot in sump was pulled back after testing was complete. <br /> "Containment pipe could not be tested as the boot at day tank end is tom. Customer has requested a quote for repairs and follow <br /> up testing. <br /> Y <br />