Laserfiche WebLink
i <br />PIPE DIMENSIONS AND RATINGS <br />. <br />SPAII17H <br />UL Listed RED THREAD° IIA Piping <br />DIMENSIONAL DATA <br />Nominal <br />Nominal <br />Nominal <br />Nominal Wall <br />Nominal <br />2", 3", 4" RED THREAD® IIA <br />Mill Test <br />External Pressure <br />Random <br />Pipe Size') <br />I.D. <br />O.D. <br />Thickness <br />Wei ht <br />Pressure -Temp. <br />Pressure <br />Max. Rating (psig/MPa) <br />Lenggths <br />75°F/24°C <br />150°F/66°C <br />(in.) <br />(in./mm) <br />(in./mm) <br />(in./mm) <br />(lbs.-ft./kg-m) <br />Max. Rating <br />(psig) <br />(ft./m) <br />2 <br />2.235 <br />2.375 <br />0.070 <br />0.4 <br />250 psig @ 150° F <br />rig <br />375 <br />85 <br />81 <br />15 <br />8,300 <br />56.77 <br />60.33 <br />1.78 <br />0.60 <br />1.72 @ 66.5°C <br />2.59 <br />.57 <br />.56 <br />or <br />3 <br />3.360 <br />3.500 <br />0.070 <br />0.8 <br />175 psig @ 150° F <br />300 <br />36 <br />34 <br />22-25 <br />23,000 <br />85.34 <br />88.90 <br />1.78 <br />1.19 <br />1.21 MPa @ 66.5°C <br />2.07 <br />.25 <br />.23 <br />5.0 <br />2.18 x 106 <br />4.360 <br />4.530 <br />0.085 <br />1.0 <br />125 psig @ 150° F <br />265 <br />34 <br />30 <br />or <br />4 <br />110.74 <br />115.06 <br />2.16 <br />1.49 <br />0.86 MPa @ 66.5°C <br />1.83 <br />.23 <br />.21 <br />6.7-7.6 <br />(1) All values except pressure -temperature <br />maximum rating are nominal values. Tolerances or <br />maximum/minimum limits can be obtained from <br />Smith Fiberglass Products Inc. <br />(2) All sizes can accept full vacuum pressures at <br />maximum temperature ratings. <br />(3) Non -UL Listed 6' secondary containment piping is <br />also available from Smith Fiberglass Products. <br />(4) Ultimate and allowable design stresses are <br />based on minimum reinforced wall thickness. Pipe is <br />manufactured in compliance with ASTM D2996. <br />(5) Design bending stress is 1/8 of ultimate to <br />account for combined stress (i.e. bending and <br />pressure). <br />(6) Design stress is based on long term cyclic fatigue <br />data using ASTM D2992 test method. However, all <br />testing is not complete at time of printing. <br />(7) For RED THREAD IIA pipe the hydrostatic <br />cyclic design stress was determined at 150° and <br />2007, per ASTM D2992 Procedure A. Based on this <br />data, the extrapolated value at 757 is 13,030 psi. <br />(8) For RED THREAD IIA pipe the hydrostatic cyclic <br />design stress was determined at 75° and 2007, per <br />ASTM D2992 Procedure A. Based on this data, the <br />extrapolated value at 1507 is 7,400 psi. <br />4 <br />Bending Radius, Minimum <br />Nominal <br />Pipe Size <br />(inches) <br />TYPICAL PHYSICAL RO <br />3" <br />PROPERTY <br />2", 3", 4" RED THREAD® IIA <br />Pipe <br />110 <br />psi @ 751 <br />MPa @ 24°C <br />psi @ 1501 <br />MPa @ 66°C <br />Axial Tensile (ASTM D2105) <br />Ultimate Stress <br />10,300 <br />71.0 <br />8,200 <br />56.5 <br />Design Stress <br />2,575 <br />17.8 <br />2,050 <br />14.1 <br />Modulus of Elasticity <br />1.82 x 106 <br />12548 <br />1.42 x 101 <br />9791 <br />Axial Compression (ASTM D695) <br />33,300 <br />230.0 <br />25,600 <br />177.0 <br />Ultimate Stress <br />8,300 <br />57.2 <br />6,400 <br />44.1 <br />Design Stress <br />1.26 x 106 <br />8687 <br />.89 x 106 <br />6136 <br />Modulus of Elasticity <br />Beam Bending (SFPTM) <br />Ultimate Stress <br />23,000 <br />159.0 <br />19,200 <br />132.0 <br />Design Stress(" <br />2,900 <br />20.0 <br />2,400 <br />16.5 <br />Modulus of Elasticity <br />2.18 x 106 <br />15031 <br />1.70 x 101 <br />11721 <br />(Long Term per ASTM D2925) <br />Hydrostatic Burst (ASTM D1599) <br />Ultimate Hoop <br />35,000 <br />241.0 <br />41,000 <br />283.0 <br />Tensile Stress <br />Hydrostatic Design (ASTM D2992) <br />2"& 3" <br />2"& 3" <br />2"& 3" <br />2"& 3" <br />Procedure <br />9,410(6) <br />64.910 <br />7,4008) <br />51(8) <br />Cyclic 150 x 106 <br />4" <br />4" <br />4" <br />4" <br />Cycles <br />13,030°' <br />89.801 <br />10,450 <br />72.1 <br />Coefficient of Linear <br />0.88 x 10-5 in./in./°F <br />Thermal Expansion (SFPTM) <br />1.58 x 10-Smm/mm/°C <br />Specific Gravity <br />1.8 <br />Flow Factor <br />Hazen -Williams Coefficient <br />150 <br />(1) All values except pressure -temperature <br />maximum rating are nominal values. Tolerances or <br />maximum/minimum limits can be obtained from <br />Smith Fiberglass Products Inc. <br />(2) All sizes can accept full vacuum pressures at <br />maximum temperature ratings. <br />(3) Non -UL Listed 6' secondary containment piping is <br />also available from Smith Fiberglass Products. <br />(4) Ultimate and allowable design stresses are <br />based on minimum reinforced wall thickness. Pipe is <br />manufactured in compliance with ASTM D2996. <br />(5) Design bending stress is 1/8 of ultimate to <br />account for combined stress (i.e. bending and <br />pressure). <br />(6) Design stress is based on long term cyclic fatigue <br />data using ASTM D2992 test method. However, all <br />testing is not complete at time of printing. <br />(7) For RED THREAD IIA pipe the hydrostatic <br />cyclic design stress was determined at 150° and <br />2007, per ASTM D2992 Procedure A. Based on this <br />data, the extrapolated value at 757 is 13,030 psi. <br />(8) For RED THREAD IIA pipe the hydrostatic cyclic <br />design stress was determined at 75° and 2007, per <br />ASTM D2992 Procedure A. Based on this data, the <br />extrapolated value at 1507 is 7,400 psi. <br />4 <br />Bending Radius, Minimum <br />Nominal <br />Pipe Size <br />(inches) <br />2" <br />3" <br />4" <br />Ft. <br />70 <br />110 <br />140 <br />m <br />21.3 <br />33.5 <br />42.7 <br />C <br />