Laserfiche WebLink
Page 6 of a <br />8. FILL RISER CONTAINMENT SUMP TESTING <br />Facility is Not Equipped With Fill Riser Containment Sumps 0 <br />Fill Rim Containment Sumps are Present but were Not Tested 0 <br />Test Method Developed By Q Sump Manufacturer u Industry Standard U Professional Engineer <br />0 Other (Specffy) <br />Test Method Used: U Pressure 13 Vacuum 13 Hydrostatic <br />13 Other (Specify) <br />Test Equipment Used: Equipment Resolution: <br />Fill Sump # Fill Sump # Fill Sump # Fill Sump # <br />Sum Diameter <br />Sump De the <br />Height from Tank Top to Top of <br />Highest Pipi!q Penetration: <br />Height from Tank Top to Lowest <br />Electrical Penetration: <br />Condition of sump prior to testing'. <br />Portion of Sump Tested <br />Sump Material: <br />Wait time between applying F <br />pressuretvacuunitwater and starting <br />test <br />Test Start Time: <br />Initial Reath ng_(R): <br />Test End Time: <br />Final Reading (RF): <br />Test Duration: <br />Ch in ReadN (RF-Pj): <br />Passfaill Threshold or Criteria: <br />Test Result: 13 Pass Q Fail Q Pass U Fail 13 Pass U Fall U Pass U Fall <br />Is there a sensor in the sump? U[YeS 0 No QYes U No ®Yes 13 No UYes U No <br />Does the sensor alarm when either 0 Yes U No Q NA U Yes Q No Q NA QYes 0N UNA U Yes Q No U NA <br />product or water is detected? <br />Was sensor removed for testing? 0 Yes C3 No Q NA 0 Yes Q No 0 NA Q Yes U No ®NA U Yes O No U NA <br />Was sensor properly replaced after 0 Yes Q No Q NA 0 Yes U No 0 NA 0 Yes Q No Q NA UYes UNo, UNA <br />tesd!Q? <br />Commierds - (include Irdwmaw on repays madepwto testing and recommended follow up forfadedtesrs) <br />