COMPLIANCE INFO_2005-2018 - Laserfiche WebLink

Home Browse Search

7S WRCB, January 2002 7. MER -DISPENSER CONTAINMENT (UDCi TEAG Page 5 of 7 Test Method Developed By: ❑ UDC Manufacturer ❑ Other (Specify) ❑ Industry Standard ® Professional Engineer Test Method Used: ❑ Pressure ❑ Other (Specify) ❑ vacuum ® Hydrostatic Test Equipment Used: INCON STS Equipment Resolution: .002 UDC Manufacturer: UDC #1 UDC # UDC # UDC # Unknown UDC Material: Plastic UDC Depth: 30" Height from UDC Bottom to Top of Highest Piping Penetration: 11" Height from UDC Bottom to Lowest Electrical Penetration: 9" Condition of UDC prior to testing: Good Portion of UDC Tested' 2" Above Piping Penetration Does turbine shut down when UDC sensor detects liquid (both product and water)?* ❑ Yes ❑ No ® NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Turbine shutdown response time NA Is system programmed for fail-safe shutdown?' ❑ Yes F]No ®NA El Yes ElNo ❑ NA E] Yes E]No ElNA El Yes ❑ No [:1NA Was fail-safe verified to be operational?` ❑ Yes ❑ No ® NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Wait time between applying pressure/vacuum/water and startin test 15 Minutes Test Start Time: 11:57/12:12 Initial Reading Ri): 3.1198/3.1209 Test End Time: 12:12/12:27 Final Reading (RF): 3.1208/3.1206 Test Duration: 2-15 Minute Tests Change in ReadingRF-Ri): .001/.0003 Pass/Fail Threshold or Criteria: .002/.002 Test Result: ® Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? ® Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing? ®Yes ❑ No ❑ NA Yes No ❑ ❑ ❑ NA ❑ Yes ❑ No NA Yes ❑ ❑ ❑ No ❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) ' If the entire depth of the UDC is not tested, specify how much was tested. If the answer to qny of the questions indicated with an asterisk (*) is "NO" or "NA", the entire UDC must he tested. (See S"CB LG -160)