COMPLIANCE INFO_2005-2018 - Laserfiche WebLink

Home Browse Search

7SWRCB, January 2002 8. FILL RISER CONTAINMENT SUMP TESTING Page 6 of 7 Facility is Not Equipped With Fill Riser Containment Sumps ❑ Fill Riser Containment Sumps are Present, but were Not Tested ❑ Test Method Developed By: ❑ Sump Manufacturer ❑ Other (Specify) ® Industry Standard ❑ Professional Engineer Test Method Used: ❑ Pressure ❑ Other (Specify) ❑ Vacuum ® Hydrostatic Test Equipment Used: INCON STS Fill Sump # 1 Equipment Resolution:.002 Fill Sump # Fill Sump # Fill Sump # rSumpameter: 37" epth: 48" Height from Tank Top to Top of Highest Piping Penetration: 18" Height from Tank Top to Lowest Electrical Penetration: 20" Condition of sump prior to testing: Good Portion of Sump Tested 2" Above piping Penetration Sump Material: Fiberglass Wait time between applying pressure/vacuum/water and starting test: 15 Minutes Test Start Time: 10:58/11:13 Initial Reading Ri): 3.2847/3.2838 Test End Time: 11:13/11:28 Final Reading (RF): 3.2839/3.2837 Test Duration: 2-15 Minute Tests Change in Reading RF-Ri): .0008/.0001 Pass/Fail Threshold or Criteria: .002/.002 Test Result: N Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Is there a sensor in the sump? ® Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No Does the sensor alarm when either or water is detected? ❑ Yes ❑ No ® NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA -product Was sensor removed for testing? ® Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing? ® Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests)