Laserfiche WebLink
0 <br /> File MH28727 Vol. 1 Sec. 1 ILL-1 Issued: 2004-01-05 <br /> And Report Revised: 2006-10-04 <br /> STEP I Drill a bole In the sump wall large enough for the pipe C •~��" <br /> to pass through. <br /> STEP 2 Using one of the poly rings as a guide,murk and drill <br /> the bait hole pattern in the sump with a%"drill biL7-7 <br /> ti r <br /> �• <br /> STEP3 Apply a liberal bead of sealant to the bottom of both <br /> the interior and exterior gasket. This ensures a seal <br /> around all the bolt holes. t`:_';�'A <br /> ;ta <br /> STEP4 Align both interior and exterior poly rings with the <br /> gaskets and install bolts and nuts. . <br /> STEP 5 Working In a star pattern,tighten all nuts to 45 Inch <.,; <br /> lbs or until snug. <br /> -e <br /> STEP 6 Install interior and exterior boots onto interior and <br /> exterior gasket rings. Tighten the large dimension <br /> clamp to 45 Inch lbs to secure the boot to the gasket <br /> STEP 7 Install pipe to the desired position and tighten both x <br /> clamps to 65 inch lbs or until tight <br /> aI Mi , <br /> e e <br /> 0060438297 <br />