Laserfiche WebLink
SWRCB, January 2002 <br />5. SECONDARY PIPE TESTING <br />Page of <br />Test Method Developed By: ❑ Piping Manufacturer ® Industry Standard ❑ Professional Engineer <br />❑ Other (Spec) <br />Test Method Used: ® Pressure ❑ Vacuum ❑ Hydrostatic <br />❑ Other (Spec) <br />Test Equipment Used: Analog Gauge Equipment Resolution: +/- 0.25 <br />Piping Run # 91 main <br />Piping Run # Piping Run # <br />Piping Run # <br />Piping Material: <br />Plastic <br />Piping Manufacturer: <br />OPW <br />Piping Diameter: <br />2" <br />Length of Piping Run: <br />325' <br />Product Stored: <br />91 unleaded <br />Method and location of <br />piping -run isolation: <br />STP to UDCs <br />Wait time between applying <br />pressure/vacuum/water and <br />test: <br />-starting <br />Test Start Time: <br />Initial Reading (RI): <br />Test End Time: <br />Final Reading (RF): <br />Test Duration: <br />Change in Reading (RF-Ri): <br />Pass/Fail Threshold or <br />Criteria: <br />Test Result: <br />❑ Pass ® Fail <br />❑ Pass ❑ Fail ❑ Pass ❑ Fail <br />❑ Pass ❑ Fail <br />Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) <br />* unable to test 91 unleaded main secondary line due to missing boots in dispensers. <br />