COMPLIANCE INFO_2013-2016 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 6. PIPING SUMP TESTING Page of_ Test Method Developed By: ❑ Sump Manufacturer ® Industry Standard ❑ Professional Engineer ❑ Other (Spec) Test Method Used: ❑ Pressure ❑ Vacuum FK Hydrostatic ❑ Other (Specify) Test Equipment Used: Incon Incon TS -STS Tester Equipment Resolution: +/-0.002" MENEM= Sump # STP 1 87 Sump # STP 2 87 Sump # STP 3 87 Sump # STP 4 87 Sump Diameter: 42" Dry 42" 42" 42" Sump Depth: 55" ❑ Yes ❑ No 9 NA 55" 55" 55" Sump Material: Fiberglass Fiberglass Fiberglass Fiberglass Height from Tank Top to Top of 114" ❑ Yes ❑ No 9 NA 16" 17" 33" Highest Piping Penetration: Height from Tank Top to Lowest 8" Electrical Penetration: 8" 12" 8" Condition of sump prior to testing: Dry Dry Portion of Sump Tested' 19" Unable to test Unable to test 22" Does turbine shut down when sump sensor detects liquid (both ❑ Yes ❑No X NA and water)?* ❑ Yes ❑ No 9 NA ❑ Yes ❑ No K NA ❑ Yes ❑ No 9 NA -product Turbine shutdown response time Is system programmed for fail-safe ❑ Yes []No k] NA ❑Yes ❑ No ® NA ❑ Yes ❑ No L NA ❑ Yes ❑ No ® NA -shutdown?* Was fail-safe verified to be ❑ Yes [-]No k NA ❑ Yes ❑ No 9 NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA -operational?* Wait time between applying pressure/vacuum/water and starting 15 minutes test: 15 minutes Test Start Time: 1:19pm 1:36pm 12:OOpm 12:34pm Initial Reading (RI): 6.8981" 6.8974" 4.2571" 4.2633" Test End Time: 1:34pm 1:51 pm 12:15pm 12:50pm Final Reading (RF): 6.8975" 6.8973" 4.2569"1 4.2638" Test Duration.. 15 Minutes Each (30) 15 Minutes Each (30) Change in Reading (RF -RI): -0.0006 -0.0001 -0.0002 0.0005 Pass/Fail Threshold or Criteria: +/-0.002" +/-0.002" +/-0.002" 1 +/-0.002" Was sensor removed for testing? k Yes ❑No ❑ NA ❑ Yes ❑ No ®NA ❑ Yes []No ®NA ® Yes ❑ No ❑ NA Was sensor properly replaced and ® Yes []No ❑ NA ❑ Yes ❑ No 9 NA ❑ Yes ❑ No ® NA ® Yes ❑ No ❑ NA verified functional after testing? Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) * Unable to test STP 2 due to a 2" missing boot. * Unable to test STP 3 due to a defective electrical boot 3"x1.5" ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to M of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)