COMPLIANCE INFO_2013-2016 - Laserfiche WebLink

Home Browse Search

Sump Diameter: 42" 42" Sump Depth: 55" 60" Sump Material: Fiberglass Fiberglass Height from Tank Top to Top of 4" 16" Highest Piping Penetration: 15 minutes Height from Tank Top to Lowest 10" 20" Electrical Penetration: 6.8981" 5.5043" Condition of sump prior to testing: Dry Portion of Sump Tested' Unable to test 24" Does turbine shut down when 15 Minutes Each (30 sump sensor detects liquid (both ❑ Yes ❑No ® NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No J NA ❑ Yes ❑ No ® NA product and water)?* +/-0.002" +/-0.002 Turbine shutdown response time 19 Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Is system programmed for fail-safe ® Yes ❑ No ❑ NA ❑ Yes ❑ No K NA ❑ Yes ❑ No ® NA ❑ Yes ❑No k NA []Yes ❑ No ® NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA shutdown?` Was fail-safe verified to be ❑ Yes []No * NA 1 ❑ Yes ❑ No ® NA I ❑ Yes ❑ No 9 NA I ❑ Yes ❑ No ® NA Wait time between applying pressure/vacuum/water and starting test: 15 minutes Test Start Time: 1:19pm 1:36pm Initial Reading (111): 6.8981" 5.5043" Test End Time: 1:34pm 1:51 pm Final Reading (RF): 6.8975" 1 5.5043" Test Duration: 15 Minutes Each (30 Change in Reading (RF -RI): -0.0006 0.0000 Pass/Fail Threshold or Criteria: +/-0.002" +/-0.002 Test Result: ❑ Pass ❑ Fail 19 Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? ❑ Yes []No k NA ® Yes ❑ No ❑ NA ❑ Yes ❑ No K NA ❑ Yes ❑ No ® NA Was sensor properly replaced and ❑ Yes ❑No IIk NA verified functional after testin ? ® Yes ❑ No ❑ NA ❑ Yes ❑ No ® NA ❑ Yes ❑ No ® NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) Unable to test STP 5 91 Unleaded due to a bad penetration boot. ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)