Laserfiche WebLink
In-N-Out Burgers NGF 255 Progate Drive Thru Service Manual <br />© 2011, IMI Cornelius Inc.- 25 -Publication Number: 621058475SER <br />NO ICE DISPENSE IN AUTOMATIC MODE <br />NO ICE DISPENSE IN AUTOMATIC MODE <br />1. Check all connections to <br />portion control pc board <br />Can you <br />dispense ice from all the ice <br />sizes <br />Some sizes <br />Is the green <br />power light on the <br />keypad on <br />Do the <br />drink valves <br />operate <br />1. Check key lock out switch. <br />2. Check transformer for power. <br />3. Check all electrical connections. <br />1. Check the <br />connector between <br />the control box and <br />the E-Box. <br />Yes Does manual mode <br />work <br />Is there ice <br /> present in the ice <br />chute <br />Yes Yes <br />Does the agitator <br /> work when the green push <br />button is pressed <br />No <br />1. Check the red LED on the E-Box pc board. <br />2. Ensure that relay 2 in the E-box is activated <br />No <br />1. Ensure that the ice <br />maker is functioning <br />properly. <br />2. Check ice in hopper <br />ensuring that it is loose <br />Yes <br />No <br />Check for proper air <br />pressure going to the <br />filter regulator in the E- <br />Box (35PSI or greater) <br />Is the air <br />pressure to the filter <br />regulater above <br />35PSI <br />1. Check the connector between <br />the control box and the E-Box. <br />2. Check terminals 6 and 8 on <br />relay 3 in the E-Box. <br />3. Check the pneumatic solenoid <br />1. Check air supply <br />shut off outside the E- <br />Box. <br />2. Check air supply to <br />the unit. <br />3. Check gate cylinder <br />for free movement. <br />Yes <br />None of the Sizes <br />No <br />Is ice <br /> chute switch <br />disabled <br />1. Check mode selector switch. <br />2. Ensure relay 2 is activated. <br />1. Check magnetic switch in chute <br />housing. <br />2. Check for magnet in chute cover. <br />3. Validate magnet distance from ice <br />chute disable switch. <br />4. Check ice chute disable switch. <br />5. Ensure that relay 1 is activated. <br />6. Check transformer power output to <br />control circuit <br />1. Relay 1 in the E-Box <br />should be activated by small <br />post on the side of the relay <br />being retracted <br />Yes <br />No <br />Yes <br />No