Laserfiche WebLink
20 <br /> MENU SCREEN ACTION DESCRIPTION <br />36026.1 010313 <br />BIB EMPTY -> 500 <br />(-) EXIT (+) <br />XX REFILL -> 155 <br />(-) EXIT (+) <br />WTR START DELAY <br />(-) .15SEC (+) <br />WTR STOP DELAY <br />(-) .15SEC (+) <br />TEST LED’S ? <br />NO EXIT YES <br />TEST SWITCHES ? <br />UseSwitchToTest <br />TEST REFILL ? <br /> EXIT YES <br />TEST HEATER ? <br /> EXIT YES <br />ENTER ASSET # <br />(-) 000000 (+) <br />SERIAL # <br />LCR 0000000 <br />VIEW FAULTS? <br />(-) EXIT (+) <br />LATEST FAULT <br />NO FAULTS <br />FACTORY DEFAULTS <br />NO YES <br />Use the (+) or (-) buttons to <br />adjust empty BIB threshold <br />Use the (+) or (-) buttons to <br />adjust Refill threshold <br />Use the (+) or (-) buttons to <br />adjust delay time <br />Use the (+) or (-) buttons to <br />adjust delay time <br />Select (YES) or (NO) <br />NONE <br />Momentarily depress (YES) <br />Momentarily depress (YES) <br />Use the (+) or (-) buttons to <br />adjust the ASSET NUMBER <br />NONE <br />Select (+) to view Fault <br />Conditions <br />Use (+) or (-) to scroll through <br />the Faults <br />Select (YES) or (NO) <br />Used to set the Conductance Threshold for the <br />Empty BIB warning. Default is 500 <br />Used to set the Conductance Threshold for the <br />Tank Refill Probe. <br />Dispense Valve ON Delay. Eliminates weak mix <br />at the beginning of a dispense. <br />Dispense Valve OFF Delay. Flushes the mix <br />chamber at the end of a dispense. <br />LED diagnostics. Selecting YES will light all Front <br />Door LED’s. <br />Switch Diagnostic: Activate switches separately to <br />test. Display will indicate which Switch has been <br />activated. NOTE: Door Interlock switch must be <br />held closed. <br />Refill Valve Diagnostic: Press YES to momentarily <br />energize the Solenoid. CAUTION: Inlet Valve will <br />open and water will flow, if connected and turned <br />ON. <br />Tank Heater Diagnostic: Press YES to momentarily <br />energize the Tank Heater Circuit. <br />CAUTION: AC power will be applied to the Tank <br />Heater Circuit. <br />Allows the user the option of entering an Asset <br />Number. Default is 000000 <br />Displays the manufacture’s Serial Number (should <br />be identical to the Serial Number on the machine <br />Data Plate) <br />This unit stores the last 3 Fault Conditions in <br />memory for diagnostic purposes. <br />Displays up to 3 FAULT Conditions or NO FAULTS, <br />if nothing has failed since the last “Reset Factory <br />Defaults”. <br />CAUTION: Selecting YES will RESET all <br />Programming Functions to the Factory Default <br />settings. <br />RELEASED FOR PRODUCTION <br />DIR Num: 36026.0001 19, May 2015