Laserfiche WebLink
n <br /> Installation Guide: Commercial AdvanTex® Systems <br /> t p'' lns a l"ACM e u and'flischarge me <br /> Step 3a: AX100 pods ship with a protective cap-plug in <br /> each outlet coupling. Before connecting the filtrate lines, -v <br /> remove these plugs from all AX 100 outlet couplings. <br /> Step 3b: Install the PVC filtrate return lines from the outlet <br /> coupling in the bottom of the AdvanTex pods to the inlet side <br /> of the recirculation valve. Use 45-degree elbows at the pod's <br /> outlet to allow proper air flow through the pipe to the textile <br /> filters. 144 <br /> ` <br /> • -j «F L`exF E Sk%g 3a3.W}SRO�e� g i .. <br /> Step 3c: Filtrate return lines should be sloped a minimum of � A�t <br /> 114"per foot.Be sure the filtrate return line is continuously <br /> sloped. Do not allow any undulations or flat sections, as this <br /> will impair proper drainage and air movement. <br /> Step 4a: Connect the fan basin to the main collection line `"' <br /> from the AdvanTex pods. The fan basin, located between the <br /> last AdvanTex pod and the recirculation valve,is manufactured <br /> with a drain plug to allow liquid to drain out.A minimum of 6" <br /> of drainage rock bedding is required to allow the basin to <br /> drain. (The bedding should cover the drain plug in the vent fan <br /> Drain plug <br /> assembly.) <br /> Step 4b: Connect the exhaust basin to the fan basin with a <br /> 4"pipe. <br /> Step 4c: The electrical fan that ships with the product <br /> requires 120 volts and should be wired to the terminals in the <br /> control panel with a minimum 14 gauge wire. <br /> IMPORTANT: The vent fan system includes a pressure <br /> transducer that confirms fan operation, so it is important to <br /> follow wiring instructions. Refer to Vent Fan Unit Wiring <br /> J Instructions(NIN-ATX-FAN-1)*for more detailed wiring <br /> instructions. <br /> * You can f nd this document on Orenco' online Document Library at www.orenco.com. <br /> NIM-ATX-AX-2 ®2003 Orenco Systems'IRC. <br /> Rev 1.0.2/03 <br />