|
N ��//'��
<br /> VI
<br /> I-
<br /> 0 U
<br /> . Lu
<br /> s
<br /> N U
<br /> S stem No. F-A-5046 cont.
<br /> System No.W-L-2078 � System No. W-L-5029 � System No.W-L-7040 � System No. C-AJ-7051 Y � ) � System No. F-A-1128 Q
<br /> ® C ® US C ® US C ® US C ® US ANSI/UL14D11 ASTM E814 CAN/ULC S115 C m US
<br /> F Ratings—1 and 2 Hr(See Item 1) ANSI/UL14DD ASTM E814 CAN/ULC 1115 © ANSI/UL14m ,STM E8141 CAN/ULC 1115 RED INC ARCHITECTS
<br /> ANSI/UL1400[ASTM E814L CAN/ULC S115 ANSI/UL14°D[ASTM E814, CAN/ULC S115
<br /> Classified by T Ratio s—0 1 and 2 Hr See Items 2 and 3 Classified by Classified by Classified by Classified b Classified b
<br /> Underwriters Laboratories,Inc. g ' Underwriters Laboratories,Inc. Underwriters Laboratories,Inc. Underwriters Laboratories,Inc. F ROmD DO Hr F Rating-3 Hr y F Ratings-2 and 3 Hr(See Items 1 and 1 A) F Ratings-2 and 3 Hr(See Items 1 and 1A) y 1217 J STREET, MODESTO, CA 95354
<br /> } F Ratio s-1,2 and 3 Hr See Items 1,3 F Ratio s-1,2 and 3 Hr See Items 1,3 F RDmOn D1 Lind 2 Hr LSDO ILED D 1 1D O1 Lod 2 Hr LS Do IE LI 01 Underwriters Laboratories,Inc. underwriters Laboratories,Inc. F Ratings-2 and 3 Hr(See Items 1 and 1A) F Ratings-2 and 3 Hr(See Items 1 and 1A)
<br /> to UL 1479 L Rati ng At Ambient—3 C FMlsq ft to UL 1479 and CAN/ULC-5115 g ( 9 ( to UL 1479 and CAN/ULC-S115 to UL 1479 and CAN/ULC-S115 to UL 1479 and CAN/ULC-5115 to UL 1479 and CAN/ULC-S115 209.522.8900
<br /> Z
<br /> L Rating At 400 F-Less Than 1 CFM/sq ft O d 411 Ood 411 ODd DD ODd Dr T RDmO D1 Hr FT RD®D D1 Hr T Ratings-0 and 1/2 Hr(See Item 2) FT Ratings-0 and 1/2 Hr(See Item 2) T Ratings-0 and 1/4 Hr(See Item 2) FT Ratings-0 and 1/4 Hr(See Item 2)
<br /> o T Ratings-0,1/2, 1 and 1-1/4 Hr(See FT Ratings-0, 1/2,1 and 1-1/4 Hr(See T RnmD DO Hr FT Rn®11 DO Hr FH RDm°DD Hr FH Ratings-2 and 3 Hr(See Items 1 and
<br /> i 1 A I � nn ILED Do 1AI I L Rating At Ambient-Less Than 1 CFM/sq ft FH Ratings-2 and 3 Hr(See Items 1 and
<br /> o L RD®D DOAO DLEDOOLDmT1111 1 111111 End 2 Hr LSEL IEL]01 FTH RD®of HR [$DEI I®0 DAD 1AE SEAL:
<br /> 0 1 B FH Ratings-1,2 and 3 Hr(See Items 1, CFM/m® ood nr FTH Ratings-0 and 1/2 Hr(See Item 2)
<br /> L Rating At Ambient-4 CFM/Sq Ft L Rating At 400 F-Less Than 1 CFM/sq ft
<br /> Q 2 o0d 40 FTH Ratings-0 and 1/4 Hr(See Item 2)
<br /> L Rating at 400°F-Less Than 1 A SOD IE:C CAO
<br /> w FTH RL�D 10 ,, 0 N A l
<br /> � A L Rating At 400 F-Less Than 1 CFM/Sq FTH Ratings-0,1/2,1 and 1-1/4 Hr CFM/m® HILTI CONSTRUCTION CHEMICALS, DIV OF HILTI INC-CFS-DID 2"MD,CFS-DID 3"MD,CFS-DID 4"MD, �j� F
<br /> Q F I$00I®11 00 CFS DID 6"MD L Rating At Ambient-Less Than 1 CFM/sq ft Gj 0
<br /> W Rating-Class 1 (See Item 3A) lv G. Q Cj
<br /> U L Rn[ii00 OOAO DLEDD°LOmTT'h�1 [$1111 I®11 11A0 G
<br /> to Q 4.Through Penetrant-One metallic pipe or tubing to be Installed within the firestop device.Pipe or tubing to be �c \ 9/i 7i
<br /> l 2 L Rating At Ambient-4 CFM/Sq Ft CFM/ � 3B 4 r d I r_d __w-id On 00®0-E I -EID TE-- _ _I - _r_-_--DE 0-EE=d 0 L Rating At 400 F-Less Than 1 CFM/sq ft �v� �1N
<br /> L Rating At 400 F-Less Than 1 CFM/Sq L Rating at 400°F-Less Than 1 Q A.Steel Pipe-Nom 4 in.(102 mm)diam(or smaller)Schedule 10(or heavier)steel pipe. [Spa I[71n r AI OL
<br /> Z FL CFM/00 L B.Iron Pipe-Nom 4 in.(102 mm)diam(or smaller)cast or ductile pipe.
<br /> Of 1 A a C.Copper Tubing-Nom 4 in.(102 mm)diam(or smaller)Type L(or heavier)copper tubing. e. 9
<br /> a- O O A 3A 36 ) a<. D.Copper Pipe-Nom 4 in.(102 mm)diam(or smaller)Regular(or heavier)copper pipe. �A i REN. 8- -2 Q
<br /> � v �
<br /> o � t t 5.Tube Insulation-Plastics+-Nom 3/4 or 1 in.(19 or 25 mm)thick acrylonitrile butadiene/polyvinyl chloride 4 4 N A 'Li�.0 \G I, �_
<br /> 4 a ' [1B/PVCoETn l nI u u mr0®od®®O�❑ OD®O®a o _ 3 1 F` HA V4 O
<br /> o Soo P®D �MFZ2oC0®110 0®®o P®DDID Romooml d Coo 011011000©001110 mr ono no 00 / � QF C P�\�
<br /> w� 4 3 3 0 DEDIDI raa Ann ROm11D�d Coo mmm�DO Ion®mD 011IIrImm DOWD®0 00000 EDE on ood
<br /> O 2 3A DEMO n ULE4 F®D n ADDIECIIE 0 DoO4[5VA o on on omd. 1 �
<br /> Q 3 -- 5A.Pipe Covering*-Nom 1,1-1/2 or 2 in.(25,38 or 51 mm)thick hollow cylindrical heavy density(min 3.5 pcf t I 0 ^ Z
<br /> A 3 _____________ �2 or 56 kg/ma)glass fiber units,jacketed on the outside with an all service jacket.Longitudinal joints sealed with ° ---� L
<br /> F __ __= O EE[1= ]E-O D•= r®o0®d SSL®oa TrooC�m===mm Dd 0 m O D®®®03rD Or O m Oo®®DO N Q)
<br /> __ __ � SECTION A-A \ O
<br /> A ®o®d n®®o o�m® � L
<br /> N SECTIONA-A _ __ S011PIEDEOdE00®0nL7DCnm'®EMEoMrIIDDI[SRGU0onnonr0®®11BEQdImnMOErIID®DIEDODI'0ErDDD00 O � � ° �
<br /> y— ( ) g g g ( p g ) -'-� � CONSULTANT:
<br /> x __ _ 1.Floor or Wall Assembl Min 4-1/2 in. 114 mm thick reinforced li of 3 in or normal wei ht 100-150 cf or 1600-2400 k/003 concrete floor 0110 111111DIIID 11 a Am®11 mm®11❑11ar®m 1111®®11 1111®m11D�]®111111Dd 0011®11®11 UL O
<br /> -- 2 -- or min 5-1/2 in.(140 mm)thick lightweight on normal weight concrete wall.Wall may also be constructed of any UL Classified Concrete Blocks`. C®mIIIT]®E MOr®C O ED D FE:D D SD-CDd I Dd00 DE25 Dr E:m ODd C SD Em DD®EOd I Ed EO ED50 D'= 3 N
<br /> 0 1.Wall Assembly-The fire-rated gypsum board/stud wall assembly shall be constructed of the materials and in the manner specified in the =_ _= Max area of o enin Is 1024 in.s 6606 cm2 with a max dimension of 32 in. 813 mm DDD 0D 11DEd. O F ❑
<br /> M individual U300,U400,V400 or W400 Series Wall and Partition Designs in the UL fire Resistance Directory and shall include the construction =_- _= P 9 q( ) ( ) A y- Z ❑ ❑
<br /> ___ ___- See Concrete Blocks(CAZT)category in the Fire Resistance Directory for names of manufacturers. �m®11®11 UL C®0011 M1111 SECTION A-A O
<br /> features noted below: y ( y ) Y 9 9 ( )9 P P Z _ � e
<br /> o -___________ 1 B 2.Steel Duct-Nom 30 b 30 in. 762 b 762 mm b No.24 au a or heavier alv steel duct.One steel duct to be ositioned within the firesto N
<br /> Z A.Studs-Wall framin ma consist of either wood studs or steel channel studs.Wood studs to consist of nom 2 b 4 in. 51 b 102 mm ---_-_-_-_-_- +-�
<br /> 9 Y Y ( Y ) 3A system.The annular space shall be min 1/4 in.(6 mm)to max 1-3/4 in.(44 mm).Duct to be rigidly supported on both sides of floor or wall 1.Floor Assembl Min 2-1/2 in. 64 mm to max 8 in. 203 mm thick reinforced li htwei ht or normal wei ht � ''� -I.- ❑ ❑
<br /> lumber spaced max 16 in.(406 mm)OC.Steel studs to be min 2-1/2 in.(64 mm)wide and spaced max 24 in.(610 mm)OC. assembl . y s( ) ( ) g g g U � I � Z ® ❑
<br /> F_ B.Gypsum Board*-Nom 5/8 in.(16 mm)thick gypsum board,as specified in the individual Wall and Partition Design.Max diam of opening is 2 Y
<br /> (100-150 pcf or 1600-2400 kg/m)concrete.When concrete thickness is min 4-1/2 in.(114 mm),the F and FH O N ❑
<br /> 36 3.Firestop System-The f restop system shall consist of the following: Reproduced by HILTI,Inc.Courtesy of R r r. � \ i
<br /> L,u 11-1/2 in.(292 mm). 1 SECTION A-A ry ❑ ❑
<br /> w 5 A.Packing Materials-Min 3-1/2 in.(89 mm)thickness of min 4 pcf(64 kg/003)mineral wool batt insulation firmly packed into opening as a Underwriters Laboratories,Inc. 1 A.Floor Assembly-(Optional,Not Shown -The fire rated concrete and steel deck floor assembl shall be � Q) L ( ❑ 11
<br /> = The hourly F Rating of the firestop system is equal to the hourly fire rating of the wall assembly in which it is installed. L A 1.Wall Assembl -The fire-rated sum wallboard/stud wall assembl shall be constructed of the materials and in the manners ecified in the ermanent form between the bare steel duct and the eri he of the o enin .Packin material to be recessed from to surface of floor or December 21 2011 ) y O � Z3 W N
<br /> v 9Yp v p p P P ry p 9 9 p I r o d r II III.Ld LL UDO O mm mCD�d®E o®d=dODmCDOm800 D'DODO SorE EdE=DEED ZZ -� Z QO O
<br /> cn 2.Through-Penetrants-One nonmetallic pipe,conduit or tubing to be installed within the firestop system.The annular space between pipe and individual U300,U400,V400 or V400 Series Wall and Partition Designs in the Fire Resistance Directory and shall include the following both surfaces of wall as required to accommodate the required thickness of fill material. H I Itl F I restop Systems :,_, -,_, � U - ® � e
<br /> rY p 9 (p ) ( ) p g y pP SECTION A-A UL Fri RII I]=D©EDID D 0Dd 1111000❑11'md 0D®D0
<br /> to periphe of o enin shall be min 0 in. Dint contact to max 1/2 in. 13 mm.Pi a or conduit to be ri idl su orted on both sides of the wall construction features: B.Fill,Void or Cavity Material*-Sealant-Min 1 in.(25 mm)thickness of fill material applied within the annulus,flush with top surface of floor - ''-' � O � � � ® .^ N ❑ ❑
<br /> = assembly.The following types and sizes of nonmetallic pipes may be used: A.Concrete Min 2-1/2 in.(64 mm)to max 8 in.(203 mm)thick reinforced lightweight or normal weight U W U)
<br /> � A.Studs-Wall framing may consist of either wood studs or steel channel studs.Wood studs to consist of nom 2 by 4 in.(61 by 102 mm) or with both surfaces of wall. _ , � � N O � ❑
<br /> 100 150 cf or 1600-2400 k /m concrete as measured over crest of fluted steel deck.When concrete -•r. W
<br /> A.Polyvinyl Chloride(PVC)Pipe-Nom 10 in.(254 mm)diam(or smaller)Schedule 40 solid-core or cellular core PVC pipe for use in closed 1.Wall Assembly The 1,2 or 3 hr fire-rated gypsum board/stud wall assembly shall be constructed of the materials and in the manner specifed in ( P 9 ) L ❑
<br /> lumber spaced 16 in.(406 mm)OC.Steel studs to be min 2-1/2 in.(64 mm)wide and spaced max 24 in.(610 mm).Additional framing HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-CP 606 Flexible Firestop Sealant,FS-ONE Sealant or FS-ONE MAX Intumescent Q to ❑
<br /> rocess or su I or vented drain,waste or vent i in s stem. the individual U300,U400,V400 or W400 Series Wall and Partition Desi ns in the UL Fire Resistance Directo and shall include the followin rn mID11m[m 11®411/2 ml d 14 11 D D�1111d FH RLI r �.
<br /> (P PP Y) ( )P P 9 Y 9 ry 9 members shall be used to completely frame around opening. Sealant � � -r_. � Z � ❑ ❑
<br /> B.Chlorinated Polyvinyl Chloride(CPVC)Pipe-Nom 10 in.(254 mm)diam(or smaller)SDR13.5 CPVC pipe for use in closed(process or construction features: B.G sum Board*-Nom 5/8 in. 16 mm thick with s uare or to ered ed es.The sum wallboard t e number of la ers and sheet - B.Steel Floor and Form Units*-Composite or non-composite max 3 in.(76 mm)deep galv steel fluted units l;>vj CU Q) _ m 7 D_ O
<br /> yp ( ) q p g gyp yp , y 4.Steel Retaining Angle Nom 2 in.by 2 in.(51 by 51 mm)by No.16 gauge(or heavier)steel angles attached to all four sides of the steel duct on N � � O ❑
<br /> supply)piping systems. A.Studs-Wall framing may consist of either wood studs or steel channel studs.Wood studs to consist of nom 2 by 4 in.(51 by 102 mm) 00 mL u i I I d a E O Old Eld ED1FE73'1OD®D D E= - -O ---� O > N N
<br /> orientation shall be as specified in the individual Wall and Partition Design Number.Max area of opening is 1300 in.2(0.84 002)with the the top surface or both surfaces of the wall.The angles shall be attached with No.8(or larger)steel sheet metal screws spaced max of 1 in.(25 U -,_, Z ❑
<br /> C.Ac lonitdle Butadiene St rene ABS Pi e-Nom 6 in. 152 mm diam or smaller Schedule 40 solid-core or cellular core ABS i e for use lumbers aced 16 in. 406 mm OC.Steel studs to be min 2-1/2 in. 64 mm wide for 1 and 2 hr F and FH ratio and 3-1/2 in. 89 mm wide for 2.Metallic Sleeve- O tional,Not Shown -Nom 4,5 or 6 in. 102,127 or 152 mm diam Schedule 10 or N e
<br /> ry Y ( ) p ( ) ( ) P P p ( ) ( ) 9 ( ) dimension of 50 in.(1.27 m).The hourly F and FH Ratings of the firestop system are equal to the houriy fire rating of the wall assembly in mm)from each end and a max of 3 in.(76 mm)OC. ( p ) ( ) ( � � � � N W � ❑ �
<br /> in closed(process or supply)or vented(drain,waste or vent)piping systems 3 hr F and FH rating and spaced max 24 in.(610 mm)OC. which it is installed. OOODIIra I I ^I TEEED 7 I I r D DD®d E:E:m3r Gm I I I I I E mo�CI r I W I I I d I] � O � � N J ❑ ❑ ❑
<br /> �11TCFT C d FTH RC?,T I11° Hr.
<br /> - � N LL
<br /> D.Flame Retardant Polypropylene(PRPP)Pipe Nom 6 in.(152 mm)diam(or smaller)Schedule 40 PRPP pipe for use in closed(process or B.Gypsum Board* Min 5l8 in.(16 mm)thick with square or tapered edges.The gypsum board type,thickness,number of layers,fastener 0 -� L �
<br /> 2.Steel Duct-Nom 24 in.by 48 in.(610 by 1219 mm)(or smaller)No.24 gauge(or heavier)galy steel duct to be installed within the firestop *Indicates such products shall bear the UL or cUL Certification Mark forjurisdictions employing the UL or cUL Certification(such as Canada), O CV ❑
<br /> supply)or vented(drain,waste or vent)piping system. type and sheet orientation shall be as specified in the individual Wall and Partition Design.Max diam of opening is 18-5/8 in.(473 mm). s stem.The annular s ace shall be min 0 Dint contact in.to a max 2 in. 51 mm Duct to be ri idl su orted on both sides of the wall res ectivel . 2A.Sheet Metal Sleeve-(Optional,Not Shown)-Nom 4,5,6 or 9 in.(102,127, 152 or 229 mm)diam,min 26 L � I N E 2 ❑ N
<br /> Y p (p ) ( ) 9 Y pp p Y � �
<br /> - The hour) F and FH Ratio s of the firesto s stem are a ual to the hour) fire ratio of the wall assembl in which it is installed. 12 I III I �
<br /> E.Polyvinylidene Fluoride(PVDF)Pipe Nom 4 in.(102 mm)diam(or smaller)PVDF pipe for use in closed(process or supply)or vented y 9 P Y q Y 9 Y assembly. 00 CCE]®ODDCGdDi❑®� 6 70 CCE]®OGSIOD'o®DDD 000E d:d®E:D®Om mm3'OD❑d®OLEO®o' � � � i N � e ❑
<br /> (drain,waste or vent)piping system. 2.Through Penetrants-One metallic pipe or tubing to be installed within the firestop system.Pipe or tubing to be rigidly supported on both sides 3.Firestop System-The firestop system shall consist of the following: EaI]C®0000E OODIDEED LE UL][rmEDd®d=DE O D E]CCQ EL L51 O O EEI•DD'®D E:C®Em d E:D.Tm Z li N (B L O i ❑
<br /> When max 6 in.diam pipe is used,T Rating is equal to the houriy fire rating of the wall.When nom 8 in.or 10 in.(203 or 254 mm)diam pipe is of wall assembly.The following types and sizes of metallic pipes or tubing may be used: A.Fill,Void or Cavity Material*-Sealant-Min 518 in.(16 mm)thickness of fill material applied within annulus flush with both surfaces of wall. Reproduced by HILTI,Inc.Courtesy of ®m®E]OC mmE:❑am CCd❑OD❑®Di❑❑DO 004 d 02❑❑DDDE:C E:C CDEOI] COE]C dOm COd mm N i B
<br /> used,T Rating is 0 hr. A.Steel Pipe-Nom 12 in.(305 mm)diam(or smaller)Schedule 10(or heavier)steel pipe. P ( ) pP Underwriters Laboratories,Inc. S stem No.W-L-7130 � LU
<br /> At Dint contact location,a min 1/2 in. 13 mm diam bead of fill material shall be a lied to the wall/duct interface on both surfaces of wall. Y ❑®E:D®GDE]m C®C mG3'CE]®O'.WCm mCOCO❑E:DEI➢Dm E]CCDf®C TCFT COd FTH RDmGC D'D 0 � � � � � �
<br /> 3.Firestop Device*-Firestop Collar-Firestop collar shall be installed in accordance with the accompanying installation instructions.Collar to be B.Iron Pipe-Nom 12 in.(305 mm)diam(or smaller)cast or ductile iron pipe. HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-FS-ONE Sealant,FS-ONE Intumescent Sealant,CP601S Elastomeric Firestop January 14,2015 C US Hr. — N (B L
<br /> installed and latched around the pipe and secured to both sides of the wall using the anchor hooks provided with the collar.(Minimum two anchor C.Copper Tubing-Nom 6 in.(152 mm)diam(or smaller)Type L(or heavier)copper tubing.When the houriy F or FH Rating of the firestop H I lti Fi restop Systems ® ANSI/UL14Do LASTM E814D CAN/ULC S115 3.Firesto Device*-Dro -in firesto device installed in core-drilled or sleeved o enin in concrete floor �' O
<br /> Sealant or CP606 Flexible Sealant. Classified by P P P P 9 � O .� N -,_,
<br /> hooks for 1-1/2 and 2 in.(38 and 51 mm)diam pipes,three anchor hooks for 3 and 4 in.(76 and 102 mm)diam pipes,four anchor hooks for 6 in. system is 3 hr,the nom diam of copper tube shall not exceed 4 in.(102 mm). B.Steel Retainin An le-No.18 MSG 0.048 in. alv steel an les cut to fit contour of duct with a 2 in.overla on the duct and a min 1 in. Underwriters Laboratories,Inc. 0®O OE:=El rd00m D m OES:D COO=E1 E]®mD®DIEDE DDa TDD E]E®0 dECOD®DDD EDEDA EO M rJ � � U
<br /> 152 mm diam I es,ten anchor hooks for 8 in. 203 mm diam I es and twelve anchor hooks for 10 in. 254 mm diam I es.The anchor hooks D.Co er Pi e-Nom 6 in. 152 mm diam or smaller Re ular or heavier co er i e When the hour) F or FH Ratio of the firesto 9 9 ( )9 9 P to UL 1479 and CAN/ULCS115 F RD®oo D1 ODd 2 Hr[SOD I E:o 1 E Ri ®Do D1 D 111 2 Hr[SOD I E:o 1❑ O O
<br /> ( ) P p ( ) P p ( ) p P pp P ( ) ( ) 9 ( ) PP p P • Y 9 P overlap on the gypsum board assembly on both sufaces of wall.2 in.leg of angle secured to duct with min No.8 by 3/4 in.long sheet metal mCDDi®E:D E:0 GDE:m COE]C®D'❑®Erm 1/4� �❑❑Gd E70 DO❑E:1 d/4 El �❑❑❑E]CC GDnD � � N
<br /> are to be secured to the surface of wall with 3/16 in.(4.8 mm)diam by 2-1/2 in.(64 mm)long steel toggle bolts along with washers.As an system is 3 hr,the nom diam of copper pipe shall not exceed 4 in.(102 mm). T R0®110 Hr FT R0®D 110 Hr
<br /> screws,spaced a max of 6 in.OC.When bead of fill material is used atjoint contact locations,angles shall be installed prior to full material System No. W-L-7156 OmOCDIDD OOOT _r f7nn n JmD D®®OIDd®D[00/]00110➢'®®D ED'000D GDOlID D'GGdDd D AD DaD'GD®D=®D L — -I. � '
<br /> alternate for pipe sizes of nom 4 in.diam or less,min No.10 by 1-1/2 in.(254 by 38 mm)long drywall or laminate screws with min 3/4 in.(19 mm) 3.Pipe Covering*-Nom 1,1-1/2 or 2 in.(25,38 or 51 mm)thick hollow cylindrical heavy density(min 3.5 pcf or 56 kg/m')glass fiber units curio . OOm3'C m00I11I d I Ii ii u I H IIIl/4 EI ES O D Dd ED: OE 111/4 E.E2 O O DEED KWIKECON 11 o®DD=E=roo M L CQ -`- Q
<br /> C® US FH RD®DD D1 Ood 2 Hr SDD I® 1❑ N �,
<br /> steel washers may be used.When the drywall or laminate screw is used,T Rating shall not exceed 1 hr. jacketed on the outside with an all service jacket.Longitudinal joints sealed with metal fasteners orfactory-applied self-sealing lap tape. *Indicates such roducts shall bear the UL or cUL Certification Mark forjurisdictions em to in the UL or cUL Certification such as Canada, ANSI/UL14OO[ASTM E814� CAN/ULC 1115 1111003-[7-I�1/4[a[5 11 C Dd®11 11111�'4 ml C45 1111 11[001111 KWIK[SOLT D®11mmD11DID111111m3•D H mlIIl/4[a � O O O O
<br /> HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-CP 643 50/1.5"N,CP 643 63/2"N,CP 643 90/3"N,CP 643110/4"N,CP 643160/6"N, Transverse joints secured with metal fasteners or with butt tape supplied with the product.For 1 and 2 hr F and FH Ratings,the annular space res ectivel . p 1 p Y 9 ( ) Classified by FTH R0®110 Hr [5❑❑11110 Oo® d❑❑G E®1111 M 11aI}iIT A11m11 ❑1111 m 11DEd.I❑11dd m1111Qn 111111 2[a[51 ❑❑®11 ❑1111 CQ �' O U
<br /> P Y Underwriters Laboratories,Inc. F Ratio s-1 and 2 Hr See Item 1 F Ratio s-1 and 2 Hr See Item 1 M
<br /> CP 644 200/8"ai 644 250/10"Firestop Collars between insulated penetrant and periphery of opening shall be min 0 in.(point contact)to max 1-7/8 in.(48 mm).For 3 hr F and FH Ratings,the to UL 1479 and CAN/ULC-6115 9 ( ) 9 ( ) nod 4[a d 02 11110®�11 d0=m®11.11/16® d 8 D D 11®110 HSC OH P18 MX DIDODIDDIDo110 0 m 011 Q) N -O
<br /> 4.Fill,Void or Cavity Material*-Sealant-(Not Shown)-Min 1/2 in.(13 mm)thickness of sealant applied within the annular space for nom 8 in. annular space shall be min 0 in.(point contact)to max 1-1/4 in.(32 mm). Reproduced by HILTI,Inc.Courtesy of T Rating-0 Hr FT Rating-0 Hr ®DD1md 111001111®11 ®d IID®0 0 U) '�' O �
<br /> and 10 in.(203 and 254 mm)diam pipes,flush with each side of wall.Sealant in annular space is optional for max 6 in.(152 mm)diam pipes.A See Pipe and Equipment Covering-Materials(BRGU)category in the Building Material Directory for the names of manufacturers.Any pipe Underwriters Laboratories,Inc. EIII➢C E:D®LEC Can HDID]Or N DO D®11 011 O O CZ$ �O =�, li
<br /> min 1/4 in. 6 mm thickness of sealant is re uired within the annular s ace,flush with each side of wall,to attain the L Ratio s for max 6 in. 152 coverin material meetin the above s ecifications and bearin the UL Classification Markin with a Flame S read Index of 25 or less and a FH Ratings-1 and 2 Hr(See Item 1) F©E]=:] � U M -
<br /> ( ) q P 9 ( 9 9 P 9 9 P Janua 27,2015 1 A 1 B S=Eoo D®O[ TD'OCOC POmEDOE: � cn
<br /> mm)diam pipes. Smoke Developed Index of 50 or less may be used. H ilti F i restop Systems ry FTH Rating-0 Hr I a =D❑ DDC I a =D O -� -`-' '- : � N
<br /> HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-FS-One Sealant or FS-ONE MAX Intumescent Sealant The hourly T,FT,FTH Ratings of the firestop system are 1/2 hr for 1 hr rated walls and 1 hr for 2 hr rated walls.For 3 hr rated walls,the hourly T, � �O 1i O O
<br /> *Indicates such roducts shall bear the UL or cUL Certification Mark for jurisdictions em to in the UL or cUL Certification such as Canada, FT and FTH Ratio s when steel and iron I es are used are 1 hr.For 3 hr rated walls,the hour) T,FT and FTH Ratio s when co er enetrants A 3A 4 1102C CFS DID 2"Mp 2 51 CD m OEDO +-
<br /> P 1 P Y 9 ( ) 9 P P Y 9 PP P Ca L �►►
<br /> System No.W-L-7155 1A 3B N N
<br /> respectively. are used are 1-1/4 hr for 2 in.(51 mm)thick pipe covering and 0 hr for pipe covering thickness less than 2 in.(51 mm). 4A 5 d 0211 011:60 -,._,
<br /> 3B CFS[DID C'MD O U
<br /> 3A.Pipe Covering*-(Not Shown)-As an alternate to Item 3,max 2 in.(51 mm)thick cylindrical calcium silicate(min 14 pcf)units sized to the C US ANSI/UL14DD LASTM E814 CAN/ULC 1115 4C I�A 4A 4B 3 3 Q) '. O
<br /> outside diam of the pipe or tube may be used.Pipe insulation secured with stainless steel bands or min 18 AWG stainless steel wire spaced max Classed by I 4B 6 d 5211 CFS IDID 4"MD 4 d 0211 O F6 � � M
<br /> Reproduced by HILTI,Inc.Courtesy of 12 in.(305 mm)OC.When the alternate pipe covering is used,the T and FT Rating shall be as specified in item 3 above. Underwriters Laboratories,Inc. F Ratings-1 and 2 Hr(See Item 1) F Ratings-1 and 2 Hr(See Item 1) U () Z GO
<br /> 0 22C0 6 11520 � = -t- O O
<br /> Underwriters Laboratories,Inc. See Pi a and E ui ment Coverin Materials BRGU cate o in the Buildin Materials Directo for names of manufacturers.An I e to UL 1479 and CAN/ULC-5115 ______ ___ CFS[DID 6"MD N
<br /> P q p 9- ( ) 9 ry 9 ry Y p P T Ratings-0 Hr FT Ratings-0 Hr -� =�, L
<br /> January 28,2015 covering material meeting the above specifications and bearing the UL Classification Marking with a Flame Spread Index of 25 or less and a 2 L � ii O b y H I LTO N-
<br /> H i Iti Fi restop Systems L Rating at Ambient-Less Than 1 0 For 0®0 m lim�D0 nnn 2® 151 D D 11d®o EAdoQID'and Too SmIP®D®rnnn©Dd®On 11md. O _,_,
<br /> Smoke Developed Index of 50 or less may be used. FH Ratings-1 and 2 Hr(See Item 1) O � Cn � �
<br /> CFM/m® HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-CFS DID 2"MD,CFS-DID 3"MD,CFS-DID 4"MD,
<br /> 4.Fill,Void or Cavity Material*-Sealant-For 1 and 2 hr F and FH Rating,min 5l8 in.(16 mm)thickness of fill material applied within the 2 CFS[DID 6"MD ,0 L (a CQ O
<br /> annulus,flush with both surfaces of wall.For 3 hr F and FH Rating,min 1 in.(25 mm)thickness of fill material applied within the annulus,flush L Rating at 400 F-Less Than 1 FTH Ratings-0 Hr A 3A.Firestop Device*-Water Barrier Module-(Optional,Not Shown)-Used in combination with the CFS-DID � � O 'I.-* L �
<br /> System N o. F-A-5046 with both surfaces of wall.At the point contact location between pipe covering and gypsum board,a min 1/2 in.(13 mm)diam bead of fill material CFM/m® d DDI d d d ll GD73.MDiDE:E]E700dOd CCCE d O Z J O O Q
<br /> shall be applied at the pipe covering/gypsum board interface on both surfaces of wall.
<br /> C m Us ANSI/UL14DO[ASTM E814I CAN/ULC S115 L Rating at Ambient-Less Than 1 W Rn-I I and L Rn-I �0 nnn n11Or nai 0 Ed DID®omd. Q J Q
<br /> HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-FS-One Sealant or FS-ONE MAX Intumescent Sealant CFM/m HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-Water Barrier Module O
<br /> Classified by F Ratings-2 and 3 Hr(See Items 1 and 1 A) F Ratings-2 and 3 Hr(See Items 1 and 1A) *Indicates such products shall bear the UL or cUL Certification Mark forjurisdictions employing the UL or cUL Certification(such as Canada), -r►* � N M z
<br /> underwriters Laboratories,Inc. 4.Through Penetrant-One metallic pipe,conduit or tubing to be installed within the firestop device.Pipe,
<br /> to UL 1479 and CAN/ULC-1115 respectively. L Rating at 400 F-Less Than 1 Q) 0
<br /> T Ratings-0 and 1/2 Hr(See Item 2) FT Ratings-0 and 1/2 Hr(See Item 2) CFM/m SECTION A-A mDd11®11 �D®D®1111 r®Cd®mm11�Dri 1111 m®DdD111111m11 110S]D EID TDD�®11®11 1111111111011®11Dm11d0®o- O U
<br /> ®O®O O OO OO OEDd O +- LL_
<br /> FH Ratings-2 and 3 Hr(See Items 1 and O
<br /> 1A0 1A
<br /> A.Steel Pi a-Nom 6 in. 152 mm diam or smaller Schedule 10 or heavier steel i e.
<br /> Reproduced by HILTI,Inc.Courtesy of 3B 1A 1.Wall Assembly-The 1 or 2 hr fire-rated gypsum board/stud wall assembly shall be constructed of the materials and in the manner specified in B.Iron Pipe-Nom 6 in.(152 mm)diam(or smaller)cast or ductile iron pipe. Z Q
<br /> FTH Ratings-0 and 1/2 Hr(See Item 2) Underwriters Laboratories,Inc. A the individual U300,U400,V400 or W400 Series Wall and Partition Designs in the UL Fire Resistance Directory and shall include the following C.Conduit-Nom 6 in.(152 mm)diam(or smaller)rigid steel conduit. U
<br /> H ilti Firesto S stems March 19,2015 3C 3B construction features: D.Conduit-Nom 4 in.(102 mm)diam(or smaller)steel electrical metallic tubing.
<br /> A p Y A.Studs-Wall framing may consist of either wood studs or steel channel studs.Wood studs to consist of nom 2 by 4 in.(51 by 102 mm) E.Copper Tubing-Nom 6 in.(152 mm)diam(or smaller)Type L(or heavier)copper tubing.
<br /> 5 4 5 lumber spaced max 16 in.(406 mm)OC.Steel studs to be min 2-112 in.(64 mm)wide and spaced max 24 in.(610 mm)OC. F.Copper Pipe-Nom 6 in.(152 mm)diam(or smaller)Regular)or heavier copper pipe.
<br /> B.Gypsum Board*-One or two layers of gypsum board,as specifed in the individual Wall and Partition Design.Max area of rectangular 1BEa[EE EI]UL CE:®0011 Mal]
<br /> p ° 3 1 --- opening is 15 sq in.(96 cm2)with max dimension of 5 in.(127 mm).In lieu of rectangular opening max diam of circular opening is 3 in.(76
<br /> 2 =_= mm).
<br /> 1 4C The F and FH Ratings of the firestop system are equal to the hourly fire rating of the wall assembly. Reproduced to HILTI,Inc.Courtesy of
<br /> ' � 1 B Underwriters Laboratories,Inc.
<br /> S stem No. W-L-1249 A SECTION A-A 2.Through Penetrants-One metallic strut,cable,rod or angle service support to be installed within the firestop system.An annular space of min December 21,2011
<br /> ° 0 c Y 1/8 in.(3 mm)to max 7/8 in.(22 mm)is required within the firestop system.Strut,cable,rod or angle service support to be rigidly supported on H I Iti Firestop Systems
<br /> C ® US F Ratings-1 and 2 Hr(See Items 1 and 3) 1.Wall Assembly-The 1 or 2 hr fire-rated gypsum board/stud wall assembly shall be constructed of the materials and in the manner specifed in both sides of floor or wall assembly.The strut,cable,rod or angle service support may be installed at an angle not greater than 45 degrees from
<br /> \ , � Classified by T Rating-1/2 Hr the individual U300,U400,V400 or W400 Series Wall and Partition Designs in the UL Fire Resistance Directory and shall include the following the perpendicular.The following types and sizes of metallic strut,cable,rod or angle service support may be used: Z
<br /> 4 Underwriters Laboratories,Inc. construction features: A.Steel Strut-Max 1-5/8 by 1-5/8 in.(41 by 41 mm)channel strut formed from min 0.105 in.(2.7 mm)thick galv or painted steel.
<br /> ° to UL 1479 and CAN/ULC-5115 A.Studs-Wall framing shall consist of either wood studs or steel channel studs.Wood studs to consist of nom 2 by 4 in.(51 by 102 mm) B.Steel Strut-Max 3-1/4 by 1-5/8 in.(83 by 41 mm)H strut formed from min 0.105 in.(2.7 mm)thick galv or painted steel.
<br /> 3 A lumber spaced max 16 in.(406 mm)OC.Steel studs to be min 3-1/2 in.(89 mm)wide and spaced max 24 in.(610 mm)OC.Additional C.Cable-Max 3/8 in.(9.5 mm)diam unjacketed galv steel cable.
<br /> framing members shall be used to completely frame around opening. D.Threaded Rod-Max 1 in.(25 mm)diam galv steel threaded rod.
<br /> A 1 B.Gypsum Board*-Min 5/8 in.(16 mm)thick,4 ft(1.2 m)wide with square or tapered edges.The gypsum board type,thickness,number of E.Steel Angle-2 by 2 by 1/8 in.(51 by 51 by 3 mm)thick steel angle.
<br /> SECTION A-A layers and orientation shall be as specified in the individual Wall and Partition Design.Max size of opening is 210 sq in.(1355 cm2)with a 3.Firestop System-The firestop system shall consist of the following:
<br /> 0 1.Floor Assembly-Min 2-1/2 in.(64 mm)to max 8 in.(203 mm)thick reinforced lightweight or normal weight max width of 14-1/2 in.(368 mm)for wood studs.Max size of opening is 76.2 sq ft.(7 002)with a max width of 105-1/2 in.(2.7 m)for steel A.Packing Material-Min 1/2 in.(13 mm)thickness of min 4 pcf(64 kg/003)mineral wool batt insulation firmly packed into opening as a
<br /> (100-150 pcf or 1600-2400 kg/ma)concrete.When concrete thickness is min 4-1/2 in.(114 mm),F Rating is 3 2 studs. permanent form.Packing material to be located between penetrant and periphery of opening,and within channels of struts.Packing material
<br /> C� p 2 The hourly F and FH Ratings of the firestop system are equal to the hourly fire rating of the wall in which it is installed. to be recessed from both surfaces of wall to accommodate the required thickness of fill material.When through penetrant is oriented W
<br /> 1A.Floor Assembl O tional,Not Shown The fire rated concrete and steel deck floor assembl shall be 2.Steel Duct-Max 100 by 100 in.(2.5 by 2.5 m)steel duct to be installed within the framed opening.The duct shall be constructed and reinforced a endicular to wall or when T e FS-ONE Sealant Item 3B is used, ackin material iso tional.
<br /> Q Y-( p )- Y A 1B PrP YP ( ) P 9 P y
<br /> mO®D®d ODE:D O OE'E:E]ODi E:E:D D 0003'mEE EDd E]E:E E3:11MOEEDODOCD800 a DODO Sahli E] ® ® ®®® ® ® ® ® ®®® SECTION A-A in accordance with SMACNA construction standards.Steel duct to be rigidly supported on both sides of wall assembly. B.Fill,Void or Cavity Material*-Sealant-Min 5/8 in.(16 mm)thickness of fill material applied within the annulus and within the channel struts,
<br /> v 3.Batts and Blankets*-Nom 1-1/2 or 2 in. 38 or 51 mm thick lass fiber batt or blanket min 3/4 cf or 12 k/003 jacketed on the outside with a
<br /> ®11 UL F 00 RDDIIIIDDm D©11010'0 D11d 111100111111•md 1111®11❑ ( ) 9 ( p 9 )1 flush with both surfaces of wall.
<br /> c 1.Wall Assembly-The 1 or 2 hr fire-rated gypsum wallboard/stud wall assembly shall be constructed of the materials and in the manner described foil-scrim-kraft facia .Lon itudinal and transversejoints sealed with aluminum foil to e.Durin the installation of the fill material the batt or
<br /> A.Concrete-Min 2-1/2 in.(64 mm)to max 8 in.(203 mm)thick reinforced lightweight or normal weight 9 9 1 p 9 HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-FS-ONE Sealant,CP 606 Sealant or FS-ONE MAX Intumescent Sealant
<br /> a in the individual U400,V400 or W400 Series Wall or Partition Design in the UL Fire Resistance Directory and shall include the following blanket shall be compressed minimum 50%such that the annular space within the firestop system shall be min 1/2 in.(13 mm)to max 2 in.(51 *Indicates such roducts shall bear the UL or cUL Certification Mark for jurisdictions em to in the UL or cUL Certification such as Canada
<br /> p (100-150 pcf or 1600-2400 kg/m)concrete,as measured over crest of fluted steel deck.When concrete 0 G 0 0 000 construction features: P I P Y 9 ( )' O
<br /> L'-I looDIDO�=EZI IID D In411/2 DI d 14 0 0 Inlool F 00d FH R0mD0,D0 011-. mm)• respectively.
<br /> � A.Studs-Wall framing shall consist of min 3-1/2 in.(89 mm)wide steel channel studs spaced max 24 in.(610 mm)OC.Additional steel studs See Batts and Blankets(BKNV)category in the Building Materials Directory for names of manufacturers.Any batt or blanket meeting the above
<br /> B.Steel Floor and Form Units*-Composite or non-composite max 3 in.(76 mm)deep galv steel fluted units (D(D (DG)G) o (D E) E) shall be used to completely frame the opening. P 9 9 p p y
<br /> s ecifications and bearin the UL Classification Markin with a Flame S read Index of 25 or less and a Smoke Develo ed Index 50 or less ma
<br /> O 00 mC®d 011 a1u UJdEIdDCCFEir[;CCElID DDDIDa B.G sum Board*-5l8 in. 16 mm thick,4 ft 1.22 m wide with s uare or to ered etl es.The sum board e,thickness,number of
<br /> 2.Metallic Sleeve- O tional,Not Shown Nom 4,5 or 6 in. 102, 127 or 152 mm diam Schedule 10 or YP ( ) ( ) q p 9 on tyP be used. Reproduced by HILTI,Inc.Courtesy of
<br /> ( p )- ( ) ( layers,fastener type and sheet orientation shall be as specified in the individual Wall and Partition Design in the UL Fire Resistance Directory.
<br /> i I I I i I'! "I I DCm mma D'OOE:d E]E:®DT O®O===O®Ear 00 E:mC W DLG G LLEE- 1IDEm EI OED1❑ 4.Firestop System-The firestop system shall consist of the following: Underwriters Laboratories,Inc. •
<br /> 0 Max area of opening is 73.7 sq ft(6.85 002)with a max dimension of 104 in.(2.64 m). 9 ( ) ( ) P ( 9 ) Y P ry W
<br /> T FT d FTH R0®111111.110 Hr. 3 A.Packin Material-Min 3-5/8 92 mm or 4-7/8 in. 124 mm thickness of min 4 cf 64 k/003 mineral wool batt insulation firm/ acked into Janua 27,2015
<br /> cn The hourly F and FH Ratings of the firestop system are equal to the hourly fire rating of the wall assembly in which it is installed. H i Iti F i restop Systems
<br /> opening as a permanent form for 1 or 2 hr fire-rated walls,respectively.Packing material to be recessed from both surfaces of wall to
<br /> 2A.Sheet Metal Sleeve-(Optional,Not Shown)-Nom 4,5,6 or 9 in.(102,127, 152 or 229 mm)diam,min 26 2.Steel Duct-Max 100 in.by 100 in.(2.5 by 2.5 m)galy steel duct to be installed either concentrically or eccentrically within the firestop system. accommodate the required thickness of fill material.
<br /> E I rI ILId Dd D m 0 26 00 DOE]DIDO®DorO®000 00000 Gdod =E:O DIDGm 000113'CO O d®OE]OEIr The duct shall be constructed and reinforced in accordance with SMACNA construction standards.The space between the steel duct and B.Fill,Void or Cavity Material*-Sealant-Min 5/8 in.(16 mm)thickness of fill material applied within annulus,flush with both surfaces of wall.
<br /> " ®m O m GDEEC CO®m®EDormood=E)d=OD 0 C®OD2 El 151 D 0 CEr03-®m®O®Om d®O.TCO SECTION A-A periphery of opening shall be min 0 in.(point contact)to max 2 in.(51 mm).Steel duct to be rigidly supported on both sides of the wall assembly. HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-FS-ONE Sealant or FS-ONE MAX Intumescent Sealant
<br /> n- DIDOm EI=EO mmE:0=00 ODd D DO D®d D O ED ED4 = d 02 D C OEO=O E:E DEDED ECE:O d Em COd ®m A 1] 2A1.Through-Pentrating Product*-As an alterate to Item 2.Fiber cement with galvanized steel facing,3/8 in.(10 mm)thick composite metallic C.Steel Retaining Angles-Min No.16 gauge(0.059 in.or 1.5 mm)galv steel angles sized to lap steel duct a min of 2 in.51 mm)and lap wall
<br /> a) O®E:O=D E =OO[10=0=ODD=®Dr.W 000 DOOODO Eloil m E:CEDt[1=0 TCFT GDd FTH RO®ED Oro 0 duct,with a max cross-sectional area of 43.0 sq ft,(4 002)and a max individual dimension of 78 3/4 in.(2 m).Duct to be installed either � im �
<br /> surfaces a min of 1 in.(25 mm).Angles attached to steel duct on both sides of wall with min No.10 steel sheet metal screws spaced a max of U
<br /> � Hr. 1.W 'A 11:0 ED]T' 1 r 2 r r r d I rd/ d I I I=E]mDDI EIII I d I L Li Lr[lllE] concentrically or eccentrically within the firestop system such that the annular space is min 0 in.(point contact)to max 2 in.(51 mm).Duct to be 1 in.(25 mm)from each end of steel duct and spaced a max of 6 in.(152 mm)OC.When max duct dimension does not exceed 48 in.(122
<br /> 3.Firestop Device*-Drop-in firestop device installed in core-drilled or sleeved opening in concrete floor CI d I :E D 00C r d I r d d id U400 S r W I r P r_I I I D[1=0 0]E:O UL F r RIJ 1100 rigidly supported on both sides of wall assembly.Refer to Ventilation Duct Assemblies in Vol.2 of the Fire Resistance Directory.
<br /> cm)and duct area does not exceed 1300 int(8387 cm2),angles may be min No.18 gauge galy steel.Angles attached to steel duct on both
<br /> � OCSI]CE]EI ODSrd EOm O®O=E EOE=E1 E:GG:EIDIDE E:®O=[1[]TOO EEE1=E dO®®EOE mDOCd OE D©[ I ro 00d EDE]= I d _®mD®0 EDOnTn011➢11 i DURASYSTEMS BARRIERS INC-Type DuraDuct HP. sides of wall with min No.10 by 1/2 in.(13 mm)long steel sheet metal screws located a max of 1 in.(25 mm)from each end of steel duct and
<br /> 0 mGDDd E:EI]=[]EOi OCE:D Ear D m E7D0 1/4 =ES 0 O Ed= ED O 11:111/4 EI E2 O O OE]DO=00 A.S 'd 7 S-,77 d 1/2�d 0000®11 mad EOE 25 MSG D01III DID11®mODEd 1101124�OC. 2A2.Through-Pentrating Product*-As an alternate to Item 2.Fiber cement with galvanized steel facing,l/4 in.(6 mm)thick,with a max 0
<br /> spaced a max of 6 in.(152 mm)OC.When max 1-1/2 in.(38 mm)thick insulation is used,steel angles are optional for those sides of duct that
<br /> +� O®OCIDO OOm Or D?DO DOOS7O®DIDEDd E]O E=EE1Er E:mE]O ErODOO mEID ErEodEdEl AD OEIrEE1=D E:E:O B.G I B rd I T-n DmmD onad®011000 n-r Lrm�DIDE1a=EI Ori 000000 IMOMME]00000110 cross-sectional area of 1764 sq in.(1.14 002),and a max individual dimension of 42 in.(1067 mm).Duct to be installed either concentrically or do not exceed the dimension specified in Table below,dependent on packing material and annular space as specified. z
<br /> � EO=ErE®DIII➢d DE=E1-I ED71/4 = 16 O O EdEID OD 111/4 EI 112 D O E1=DO KWIKECON II O mDaE=GDm Dn m11D nd®1111 OldEM nnOJVE®Dd P3®n D=n M nD Dron 11011000®n®1160 m Lm 11®n Dn eccentrically within the firestop system such that the annular space is min 0 in.(point contact)to max 2 in.(51 mm).Duct to be rigidly supported
<br /> _0 00m11'EH 001/4[a IIS 110 Ddlon On 1 EV4 ml A5 11110®110 KWIK[SOLT 0 FMEI 0Dm0 mm11�Or Hm1/4 DI d E:EE1=D OEC = on both sides of wall assembly and installed in accordance.Refer to Ventilation Duct Assemblies in Vol.2 of the Fire Resistance Directory. ADDLE Q
<br /> IS 110 DEO 114 La d 11110 0®D M11�DHIT Anm11.11 On On orad.I0 Dddmnoar nnn 2® [51 D D DIn[a DU6 0 0 0 TEE EDD'E:F ROEDO E1=E EED�D»mD a COCE==0 CEDE:E7010000 COE:O O D==111®E:D OED E:E] DURASYSTEMS BARRIERS INC-Type DuraDuct SD. M1111 Lfl®D lY
<br /> n ood 4 El A 02 0 0 D®®o d onIIDm®11 11/16[a 118 110 0®D H MI)iH P18 MX DII]®11aO 0110110 ®nIDmd. 2A3.Through-Pentrating Product*-As an alternate to Item 2.Galvanized steel faced duct panel,with a max cross-sectional area of 2450 sq in. DDOD DCD Ii
<br /> 0 ®®EDi ar110110®11 DIff]®n11111®11 ED noon Older TDO®DDIDO dDO ]000000®D MIAd DOd 0®®d IID®11 (1.58 002),and a max individual dimension of 49-1/2 in.(1258 mm)Duct to be installed either concentrically or eccentrically within the firestop D®nom Dom PD®D R000©0
<br /> v 2.71111111111 Pm11E11D ID0111111 11 1111 111111 2 ml d®11 m 11EIt 111®Cd DDI DS 11d❑®11 11®®mm❑®®®11® s stem such that the annular s ace is min 0 in. oint contact to max 2 in. 51 mm Duct to be ri idl su orted on both sides wall assembl Notes: ZO
<br /> ®®C®C®®C [EMTn®011®®®d n mD]®o Loan®a TELE rnnnDI mom 110®non m11d11®Or�n®n m11m11 n[m 0 Ion ®0®o Y P (t ) ( )• 9 Y pp Y• DD T[�I Dm Annnmr Soo00 MD�LED d
<br /> Refer to Ventilation Duct Assemblies in Vol.2 of the Fire Resistance Directory.
<br /> 0 ® DID®0 0110EY8�T110 COCOEr m11m 110®nnn mndn®11•®M111 OEd 011'EI011'D 0000110®0 000000 D® DURASYSTEMS BARRIERS INC-Type DuraDuct GNX. 24 Do Lr 1/2 M o LE LE 1 ELL I LED DA1 ND
<br /> -0 0 El :DE1=OmEE[1=E:0 CE C=C ODd EE73'EI:EIE=CD i E:m0E3•E:d ED OCE:Od 00 000 OEIIIID CEI 24 on EIDE/➢' D Do U
<br /> � torn®0007000 a Fm1a/Ord I rCI I vv�MnE]'®mFCOCOF®Cmr®mo0®d o®®mm®C mm 0000®GD®®m®DC®M®
<br /> 3FirestopSystem-Thefirestopsystemshallconsistofthefollowing: 1. Refer tO sectlOn 15084 Of the s eclflcatlOns. FOr QUaIIt COntrOl
<br /> v A.Packing Material-(Optional,Not Shown)-Polyethylene backer rod,mineral wool batt insulation or fiberglass batt insulation friction fitted 1610 A o®25 o o❑ p y U
<br /> NCC PED �D 11 5 11 5A0 CD O H CE E]ID CI r r 1 Hr F RD®C a4®4 El M E]EDI]CE7E]®EIDGm Er 2 Hr F RC®C 1176 El into annular space.Packing material to be recessed from both surfaces of wall to accommodate the required thickness of fill material. D D Ll
<br /> _0 a TDED malt! 4 ODd TEI=El : F©EmID Or S®Cm DE:E D HILTI CONSTRUCTION CHEMICALSCDIV OF HILTI INC E:CP 620 F[ED FEED requirements refer to the Qualit Control Ylortion of the
<br /> 0 A1.Packing Material-Required as specifed in Table below.Min 3-3/4 in.(95 mm)or 5 in.(127 mm)thickness of min 4 pcf(64 kg/003)mineral `1 y N i =
<br /> Q DE:C A a E I a ®O O DI u I I I I I a =D O [�o11'®n DID UL C I I I I I M 11.0 wool batt insulation firmly packed into opening as a permanent form for 1 and 2 hr rated assemblies,respectively.Packing material to be Z
<br /> 114 11 1 111111 25 recessed from both surfaces of wall to accommodate the required thickness of fill material. *Indicates such products shall bear the UL or cUL Certification Mark forjurisdictions employing the UL or cUL Certification(such as Canada), specification. U Q
<br /> � 1/2 1 DO respectively. J
<br /> 4 d 020 B.Fill Void or Cavi Material* Sealant-Min 518 in. 16 mm thickness of fill material a lied within the annulus flush with both surfaces of
<br /> U
<br /> AB/PVC CFSI DID 2"MD Re roduced b HILTI,Inc.Courfes of ty ( ) PP 2. Details shown are t ical details. If field conditions do not match
<br /> � 114 11.1 111111.25 p Y Y wall.Min 1/4 in.(6 mm)diam bead of fill material shall be applied at the point contact location between the steel duct and the gypsum board. yp
<br /> Underwriters Laboratories,Inc. HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-CFS-S SIL GG Sealant,FS-ONE Sealant,FS-ONE MAX Intumescent Sealant or
<br /> fin 1 250 AB/PVC CFS[DID D'MD 5:12CE December 7,2001 Re roduced b HILTI,Inc.Courtes of requirements of typical details, approved alternate details shall be
<br /> CP606 Flexible Firestop Sealant p y Y
<br /> 44 Or 1 111111.25 Hilti Firestop Systems Underwriters Laboratories,Inc.
<br /> � C.Steel Retaining Angles-Min No.16 gauge galy steel angles sized to lap steel duct a min of 2 in.(51 mm)and to lap wall surfaces a min of 1 utilized. Field conditions and dimensions need to be verified for
<br /> 2 X51 D AB/PVC CFS DID 4"Mp 6 115211 in. 25 mm.When max duct dimension does not exceed 48 in. 122 cm and duct area does not exceed 1300 int 8387 cm2,an les ma be January 27,2015 REVISIONS:
<br /> ( > ( ) ( ) 9 y Hilti Firestop Systems
<br /> +� 14 a 1 d O D 25 min No.18 gauge galv steel.Angles attached to steel duct on both sides of wall with min No.10 by 1/2 in.(13 mm)long steel sheet metal compliance with the details, including but not limited to the
<br /> 0 4 110211 AB/PVC CFS[DID i 11[221111 screws located a max of 1 in.(25 mm)from each end of steel duct and spaced a max of 6 in.(152 mm)OC.Steel angles are optional for Q H I ETON 10/18/2018
<br /> = those sides of duct that do not exceed the dimension specified in Table below,dependent on packing material,sealant and annular space as foll owing:
<br /> T 1/2 110° 1 12511G®mFIm11r CFS[DID 2"MD 4 110211 specified.
<br /> 0 1 250 1 [250GI]➢mFIDEr CFS[DID D'MD 5 11200 Aoo® * Minimum and maximum Width of Joints
<br /> M DD TIDC
<br /> 1 250 111/2 D 611G®mFE>7 CFS DID 4"MD 6 115211 DDm 11Cn * Type and thickness of fire-rated construction. The minimum
<br /> -= 2[510 1 [250GI]➢mFIDEr CFS[DID 4"MD 6 11520 DE]DOm DDm PD®D RDmED
<br /> 0 0D TOII IDM AnnnDrSDDm MOEIm d assembly rating of the firestop assembly shall meet or exceed
<br /> 0 2[5111 2 15111G®FOp-r CFS DID 6"Mp 0[22110
<br /> -0 24 DD Or 1/2 la 0In®1 ® IE o DA1 N0 the highest rating of the adjacent construction.
<br /> 4 110211 1 [25 EG=F CFS[DID i 0 C22EO 24® ODDDID- D Do
<br /> 1610 1111®25 D 11 E 3. If alternate details matching the field conditions are not available,
<br /> nnn
<br /> manufacturer's engineering judgment drawings are acceptable.
<br /> *Indicates such products shall bear the UL or cUL Certification Mark for jurisdictions employing the UL or cUL Certification(such as Canada),
<br /> W respectively. Drawings shall follow the International Firestop Council (IFC)
<br /> Q) Reproduced by HILTI,Inc.Courtesy of Guidelines for Evaluating Firestop Systems Engineering
<br /> Underwanuary 27 12015 s,Inc. g
<br /> Q Hilti Firestop Systems U meats.
<br /> 4. References: RED PROJECT # 18050
<br /> * 2013 Underwriter's Laboratories Fire Resistance Directory, HILTON # 18-428ND
<br /> Volume 2 PLANNING # SPR-18-102
<br /> * NFPA 101 Life Safety Code PERMIT # —
<br /> *All governing local and regional building codes
<br /> L. APN # 196-270-23
<br /> 5. Firestop System installation must meet requirements of ASTM
<br /> n
<br /> E-814 (UL 1479) tested assemblies that provide a fire rating equal DATE: 11.12.18
<br /> to that of construction being penetrated. DRAWN: NR
<br /> C, 6. All rated through-penetrations shall be prominently labeled with CHECKED: GD
<br /> Q the following information:
<br /> *ATTENTION: Fire Rated Assembly
<br /> * SHEET TITLE:
<br /> UL System #
<br /> Cn * Product'sI used FIRE PROTECTION
<br /> *Hourly Rating (F-Rating) DETAILS
<br /> 0
<br /> * Installation Date
<br /> 0
<br /> s_
<br /> 0
<br /> 0
<br /> .�
<br /> n
<br /> .3.
<br /> SHEET NO.:
<br /> 0
<br /> >_
<br /> M01
<br />
|