SU0014047 - Laserfiche WebLink

Home Browse Search

Each parking stall shall be an unobstructed rectangle, minimum 8 % feet wide and 18 feet long to serve both full sized and compact cars. (Development Title Section 9-1015.5M[b]) A. Compact Spaces: If parking stalls are not designed to accommodate both full-sized and compact cars, as specified in iii., compact spaces shall comprise a minimum of 25% of the total parking spaces required. All parking stalls and directional arrows must be delineated with paint. (Development Title Section 9-1015.5[0 The site shall provide secure bicycle facilities, consisting of bicycle lockers or racks as appropriate, free of charge to all employees. Bicycle parking rack or storage device shall be provided at a rate of 5 spaces per building complex plus 1 space for every 15 automobile parking spaces. (Development Title Section 9-1015.7M) Passenger Loading Areas for Rideshare Vehicles. In areas zoned for Public, Office Commercial (C-0) or Industrial uses, passenger-loading areas for ridesharing vehicles shall be located near the main employee entrances to buildings. For every 200 parking spaces provided, 1 ridesharing vehicle space, measuring 9 feet by 20 feet, shall be provided. The area set aside for the ridesharing vehicle shall be covered and signed. Carpool vehicles may use the ridesharing vehicle space, but said use shall be limited to passenger drop-off and pickup only. Truck Parking and Loading: The requirements for truck parking and loading shall be as provided in the Development Title, with the following modification: A. Areas for receiving and loading of material on the premises of commercial and industrial uses shall be located away from the public street to which the use is oriented. (Development Title Section 9-1015.6M) Timing: Prior to the approval of Improvement Plans and Building Permits. FENCING AND PRIVACY WALLS: Fencing and Privacy Walls shall be provided and comply with the following: 1. Site perimeter, screening, and area fencing shall be consistent with the Mountain House Commercial, Office and Industrial Design Manual. (Chap. 3) Timing: Prior to the approval of Improvement Plans and Building Permits. SERVICE AREAS: Service Areas shall be provided and comply with the following: All service, trash, storage areas, and utility equipment shall be screened from public view utilizing a combination of planting and architectural elements that are consistent with the project architecture. (Mountain House Commercial, Office and Industrial Design Manual, Chap. 3, Pg. 21) Walls used for screening shall be a minimum of six inches higher than the item/area being screened. (Mountain House Commercial, Office and Industrial Design Manual., Chap. 3, Pg. 21) 23