COMPLIANCE INFO - Laserfiche WebLink

Home Browse Search

Health and Safety Plan 705 Carlton Avenue, Stockton, CA EFI Global Project No. 9836003958 Pipe shall not be used as a substitute for wrenches. Only appropriate tools shall be used for the job. Appropriate PPE shall be used when using tools. Wrenches shall not be altered by the addition of handle-extensions or "cheaters." Files shall be equipped with handles and not used to punch or pry. A screwdriver shall not be used as a chisel. Wheelbarrows shall not be pushed with handles in an upright position. Portable electric tools sha 11 not be lifte d or lowe red by m eans of the power cord. Ropes shall be used. Electric cords shall not be exposed to damage from vehicles. In locations where the use of a portable power tool i s difficult, the tool shall be supported by means of a rope or similar support of adequate strength. 11.2 ILLUMINATION Supplemental lighting shall be supplied to provide not less than 3 foot-candles of illum ination in all work areas. Higher levels may be required as prescribed by 29 CFR 1910.120 (m). 11.3 SANITATION An adequate supply of potable water will be provided on the site in enclosed containers. Toilet facilities will be supplied in accordance with 29 CFR 1910.120 (n). Adequate washing facilities and change rooms will be available for all site workers as specified in 29 CFR 1910.120 (n)(6) and (7). 11.4 VENTILATION Adequate ventilation will be supplied to reduce d ust and supply fresh air for workers working withi n enclosures. 11.5 EXCAVATION If excavation is encountered, work within and around an excavation shall conform to the following: Work in any trench or excavation MUST be under the direct supervision of a Competent Person, as defined by OSHA in 29 CFR 1926.32(f), with experience in this type of work. Proper trench and excavation procedures shall be followed. A trench or excavation m ust b e inspected prior to entry to ensure that it is safe. Means of egress must be provided for any trench deeper than 4 feet. Ladders must be placed at each end and must not be further than 25 feet apart. Ladders shall ex tend 36" above the opening/surrounding ground and be secured. Trenches and excavations deeper than 5 feet must be sloped, shored, or shielded. Spoils and loose tools that are not tied down m ust be kept at least 2 feet fr om the edge of the excavation. Warning signs and appropriate barricades must be posted around all open excavations and trenches. EFI Global Engineering Fire & Page 11 of 19