Laserfiche WebLink
MULTI-PURPOSE SOUND SYSTEM <br />Section 16780 <br />15-1207 <br />6) Wire quantity. <br />C. Sections/Elevations. At scale of Contract Documents. <br />1) Mounting location reference. <br />d. Enlarged Plans. At scale of Contract Documents or larger as required for <br />trade coordination, show: <br />1) Refer to "floor plans". <br />2) Architectural features. <br />3) Rack elevations. <br />4) Cluster drawings. <br />5) Clearances. <br />e. System conduit riser drawing, show: <br />1) Terminal cabinets, pull boxes. <br />2) Coordination with floor plans. <br />3) Wire runs not shown on floor plans. <br />4) Wire type. <br />5) Wire quantity, fill. <br />f. Mounting details, show: <br />1) Stamped and signed by Engineer licensed in jurisdiction for work of <br />this type, (optional). <br />2) Loads, strength of connections, etc. <br />3) Calculations on drawings or in bound volume for review by authorities <br />having jurisdiction <br />4) Provide details for: <br />a) Racks. <br />b) Loudspeaker cluster(s). <br />g. Installation details as required <br />1) Terminal cabinets: terminations. <br />2) Rack: equipment terminations. <br />h. Wire run sheets, show: <br />1) Wire number. <br />2) Source. <br />3) Destination. <br />4) Signal type. <br />5) Wire type. <br />6) Operating level or voltage. <br />3. Shop (Fabrication) Drawings: Collate in sequence: <br />a. Drawing index/symbol sheet (if separate set from Field Drawings). <br />b. System functional drawings. Submit separate drawing for each system. <br />show: <br />1) Equipment: Function, make, model. <br />2) Wire number. <br />3) Wire type. <br />4) Shield condition at both ends (float, ground, location of ground.) <br />5) Connector wiring details, each type. <br />C. Equipment rack elevations. All racks scaled at 1 1/2"= V-0", or larger, <br />show: <br />1) Equipment: Function, make, model. <br />d. Rack wiring drawings for each rack: <br />1) Power strip: receptacles, circuiting. <br />5 <br />