WORK PLANS - Laserfiche WebLink

Home Browse Search

CONSTRUCTION FACILITIES AND TEMPORARY CONTROLS Section 01500 15-1207 PART 2 -PRODUCTS 2.01 TEMPORARY UTILITIES A. General: Provide water, electricity, gas, fire protection and other specified utility services required during construction and extend temporary service lines to construction areas to allow use by all trades and subcontractors. B. Temporary Water: 1. Owner will provide source and pay for water for construction purposes from existing available source(s) on site. This does not include use of hydrants or off-site sources. If necessary provide and pay for these services. 2. Provide temporary connections to source and sufficient hose or pipe to carry water to every required part of construction. C. Temporary Electrical Facilities: 1. Electrical Service: Provide such temporary electrical power and facilities as necessary to supply lighting for work operations and power for portable power driven tools and for testing. 2. Owner will provide temporary power free of charge from existing outlets. If existing sources are insufficient, provide and pay for temporary service from off-site. 3. Construction Requirements: Construct and maintain all temporary electrical facilities in accordance with division of Industrial Safety "Electrical Safety Orders" (ESO), Public Utilities Commission 'Rules for Overhead Line Construction" (G.O. 95), and requirements of equipment used for these facilities shall be in good and safe condition, but need not be new. D. Temporary Heat and Ventilation: Provide heat and ventilation as required to protect work and materials and to keep humidity down to extent required to prevent corrosion of metal and to prevent dampness or mildew which is potentially damaging to materials and finishes. In addition, provide heat and ventilation prior to and during specific work operations, as follows: a. For 7 days previous to placing of interior finish materials and throughout application of drywall, painting and laying of resilient flooring materials, provide sufficient heat to produce temperature of not less than 65 degrees F. b. After finishing trades are completed and until final acceptance or occupancy by Owner, provide sufficient heat to maintain temperature of not less than 60 degrees. 2. Fuel, equipment and method of heating and ventilating shall be approved by Architect. 2.02 FIELD OFFICE A. Provide field office on site. Include separate office space of sufficient size for use by Architect and Inspector. Office shall be of temporary form of construction with wood floor; 2