Laserfiche WebLink
COLD FORMED METAL FRAMING <br />Section 05400 <br />15-1207 <br />PART 1 - GENERAL <br />1.01 INCLUSION OF OTHER CONTRACT DOCUMENTS <br />A. The General Conditions, Supplementary Conditions and Division 1 are fully applicable to this <br />Section, as if repeated herein. <br />1.02 RELATED WORK SPECIFIED ELSEWHERE <br />A. Section 05100, Structural Steel <br />B. Section 05110, Miscellaneous Metals <br />C. Section 05300, Metal Decking <br />D. Section 06100, Rough Carpentry <br />E. Section 09200, Lath and Plaster <br />F. Section 09250, Gypsum Wall Board <br />1.03 QUALITY ASSURANCE <br />A. Use only new materials and products, unless existing materials or products are specifically <br />shown otherwise on the Drawings to be salvaged and re -used. <br />B. Use materials and products of one manufacturer whenever possible. <br />C. All materials, components, assemblies, workmanship and installation are to be observed by <br />the Owner's Inspector of Record. Work not so inspected is subject to uncovering and <br />replacement. <br />D. Manufacturer: Company specializing in structural framing components with three years <br />minimum experience. <br />E. Qualifications: <br />1. General: All welding shall be in compliance with Section 05100 and applicable <br />provisions of the AISI 2001 North American Specification for the Design of Cold - <br />formed Steel Structural Members, including 2004 Supplement. <br />2. Welders: Qualified for light gauge welding in accordance with AWS D1.3 <br />1.04 SUBMITTALS <br />A. Refer to Section 01300. <br />B. Manufacturer's Data: <br />1. Descriptive data illustrating cold -formed framing system components including <br />fasteners and accessories, including ICC -ES reports. <br />2. Erection instructions containing sequence of operations. <br />3. Maintenance Instructions <br />i <br />