Laserfiche WebLink
THERMOPLASTIC MEMBRANE <br />ROOFING - ADHERED <br />Section 07541 <br />15-1207 <br />Sarnavap Self -Adhered is available in rolls 44.9 inches x 133.8 feet. Consult Product Data <br />Sheet for additional information. <br />C. Bituminous <br />A bituminous vapor barrier may be used beneath the insulation. <br />2.09 MISCELLANEOUS ACCESSORIES <br />A. Aluminum Tape <br />A 2 inch wide pressure -sensitive aluminum tape used as a separation layer between small <br />areas of asphalt contamination and the membrane and as a bond -breaker under the <br />coverstrip at Sarnaclad joints. <br />B. Multi -Purpose Tape <br />A high performance sealant tape used with metal flashings as a preventive measure against <br />air and wind blown moisture entry. <br />C. Perimeter Warning Tape <br />Designed for use on PVC membranes as a reflective, highly visible pressure sensitive yellow <br />tape used to draw attention to roof perimeters and potential hazardous areas. The tape is <br />available in 2 inch wide rolls by 30 feet long and comes on a release liner for easy <br />application. Perimeter Warning Tape exceeds reflectivity 3 requirements and Federal spec. <br />L -S-300, Class 1. Consult Product Data Sheet for additional information. <br />Perimeter Warning Membrane <br />Designed to be heat welded to PVC membranes, it is a highly visible yellow membrane used <br />to draw attention to roof perimeters and potential hazardous areas. Made from our G410 <br />membrane it comes in rolls 4" wide by 100' long. Consult Product Data Sheet for additional <br />information. <br />2.10 SEALANTS AND PITCH POCKET FILLERS <br />A. Sikaflex-1 a (for termination details and pitch pocket toppings). <br />B. Sarnafiller (two -component urethane adhesive for pitch pocket toppings). <br />C. Depending on substrates, the following sealants are options for temporary overnight tie-ins: <br />1. Type III hot asphalt conforming to ASTM D312 (latest version). <br />2. Sarnafiller. <br />3. Multiple layers of roofing cement and felt. <br />4. Spray -applied, water-resistant urethane foam. <br />5. Mechanical attachment with rigid bars and compressed sealant. <br />2.11 MISCELLANEOUS FASTENERS AND ANCHORS <br />A. All fasteners, anchors, nails, straps, bars, etc. shall be post -galvanized steel, aluminum or <br />14 <br />