Laserfiche WebLink
LATH & PLASTER <br />Section 09200 <br />15-1207 <br />A. Refer to General Conditions and Section 01300. <br />B. Submit fully executed Guarantee with submittal package required by Article 1.04. <br />C. Provide manufacturer's 10 -Year Limited Finish Material Warranty for 100% Acrylic Finish <br />Coat. <br />D. If Preblended Plaster Mix is used, provide manufacturer's 10 -Year Limited Material Warranty. <br />1.06 REFERENCES AND STANDARDS <br />A. Title 24, Part 2, CCR, California Building Code (latest adopted edition). <br />B. Plaster Assembly Manual by the Technical Service Information Bureau (www.tsib.org). <br />C. ASTM C 926, Standard Specification for Application of Portland Cement -Based Plaster <br />D. ASTM C 1063, Standard Specification for Installation of Lathing and Furring to Receive <br />Interior and Exterior Portland Cement -Based Plaster. <br />E ICC -ES Report ESR -2535 for Preblended Plaster Mix. <br />F. ASTM E 84, Test method for Surface Burning Characteristics of Building Materials. <br />G. NFPA 285, Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of <br />Exterior Non -Load Bearing Wall Assemblies Containing Combustible Components. <br />H. In case of conflict between governing codes, "Standards" and these Specifications, furnish <br />and install larger size or higher standard called for without extra charge to the Owner. <br />1.07 DELIVERY, STORAGE AND HANDLING <br />A. Deliver undamaged products to job in manufacturer's sealed containers and/or original <br />bundles with tags and labels intact. Upon arrival at job site, all liquid materials shall be <br />inspected for physical damage, freezing or overheating. Questionable materials shall not be <br />used. All liquid materials shall be protected at the job site from direct sunlight, inclement <br />weather and shall be stored at temperatures as recommended by the manufacturer. <br />B. Store materials in protected, dry conditions off of ground and in areas so as to not interfere <br />with the progress of the work. Store aggregate on suitable platforms to prevent intrusion of <br />earth or other foreign matter. <br />C. Transport, store and handle in strict accord with the manufacturer's written recommendations. <br />D. Make delivery to job when notified by Contractor verifying that the job is ready to receive the <br />work of this Section and that arrangements have been made to properly store, handle and <br />protect such materials and work. <br />1.08 PROJECT CONDITIONS <br />A. Do not apply base coats in conditions of rain or high wind. Do not apply when ambient <br />3 <br />