WORK PLANS - Laserfiche WebLink

Home Browse Search

COMPOSITE TOILET PARTITIONS Section 10170 15-1207 2. Hardware of chrome -plated "Zamak", aluminum, or plastic is unacceptable. 3. All hardware to be Vandal -Resistant, Institutional Grade. E. Latch 9 tfWpL-_7= 1. Sliding door latch shall be 14 gauge (2 mm) and shall slide on nylon track. C -f 3$ -1//}fF. 2. Sliding door latch shall require less than 5 -Ib force to operate. Twisting latch operation will not be acceptable. 3. Latch track shall be attached to door by machine screws into factory -installed threaded brass inserts. 4. Threaded brass inserts shall be factory installed for door hinge and latch connections and shall withstand a direct pull exceeding 1,500 lbs. per insert. 5. Through bolted, stainless steel, pin -in -head Torx sex bolt fasteners shall be used at latch keeper -to -stile connections and shall withstand direct pull force exceeding 1,500 lbs. per fastener. F. Hinges � vim s . S`�L • --I-�, Gu/�. �vLL $ ��? s/b -f .3'`f 1. Hinge shall be 16 -gauge (1.6 -mm) continuous piano hinge. 2. All doors shall be equipped with self-closing hinge. 3. Continuous piano hinge shall be attached to door and stile by theft -resistant, pin -in - head Torx stainless steel machine screws into factory -installed, threaded brass inserts 4. Fasteners secured directly into the core are not acceptable. 5. Door shall be furnished with two 11 -gauge (3 -mm) stainless steel door stop plates with attached rubber bumpers to resist door from being kicked in/out beyond stile. 6. Door stops and hinges shall be secured with stainless steel, pin -in -head Torx machine screws into threaded brass inserts. 7. Threaded brass inserts shall withstand a direct pull force exceeding 1,500 lbs per insert. G. Mounting Bracket 1. Mounting brackets shall be 18 -gauge (1.2- mm) stainless steel and extend full height of panel. 2. U -channels shall be furnished to secure panels to stiles. 3. Angle brackets shall be furnished to secure stiles to walls and panels to walls. 4. Fasteners at locations connecting panels -to -stiles shall utilize through bolted, stainless steel, pin -in -head Torx sex bolt fasteners. Through -bolted fasteners shall withstand direct pull force exceeding 1,500 lbs. per fastener. 5. Wall mounted urinal screen brackets shall be 11 gauge (3 mm) double thickness. H. Leveling Device shall be 7 -gauge, 3/16" (5 -mm) hot rolled steel bar; chromate -treated and zinc -plated; through -bolted to base of solid color reinforced composite stile. Stile Shoe shall be one-piece, 4" (102 -mm) high, type -304, 22 -gauge (0.8 -mm) stainless steel with satin finish. Top shall have 900 return to stile. Shoe will be composed of one-piece of stainless steel and capable of being fastened (by clip) to stiles starting at wall line. 5