WORK PLANS - Laserfiche WebLink

Home Browse Search

FOOD SERVICE EQUIPMENT Section 11400 15-1207 B. The Food Service Equipment Contractor shall provide at his own expense the installation, start- up and service for one (1) year from the date of recording the notice of completion of the project; the replacement of all condensing units and other refrigeration devices supplied under this contract. In addition to this one (1) year free service, the condensing units shall have a five (5) year compressor warranty; said warranty commencing at the date of completion. PART 2 PRODUCTS 2.1 MATERIALS A. Metal for construction purposes, where entirely concealed, shall be steel of wrought iron sections galvanized by the hot -drip process after fabrication. Bolts, screws, rivets, and similar attachments to this galvanized work shall be galvanized or brass. Exposed screw and rivet work shall be finished to match adjacent surfaces, flush and buffed smooth. Finished work shall be free of tool or construction marks, dents, or other imperfections; and at the completion of the work, all metal shall be gone over with a portable machine and buffed and dressed to perfect surfaces. B. All materials shall be new and of first grade. All gauges specified herein shall be minimum and shall be minimum and shall be established after polishing. They shall refer to: 1. U.S. Standard Gauge for sheets and plates. 2. Stainless steel shall be manufactured by one of the following: Allegheny Ludlum Steel Corporation, American Rolling Mills, U.S. Steel Corporation. C. The Contractor will be required to furnish a certified copy of the mill analysis of materials to the Architect and/or Consultant. D. Stainless steel sheets shall conform to ASTM A240, Type 304 Condition A, 18-8 having a No. 4 finish. No.213 finish shall be acceptable on surfaces of equipment not exposed to view. All sheets shall be uniform throughout in color, finish and appearance. E. Stainless steel tubing and pipe shall be Type 304, 18-8, having a No. 4 finish, and shall conform to either ASTM A213 if seamless or ASTM A249 if welded. F. Galvanized steel shall be approved grade of copper -bearing steel sheets with a minimum copper content of 20%. All sheets to be commercial quality, stretcher leveled, bonderized and re -rolled to insure smooth surface. Galvanized steel shall not be allowed in the construction and fabrication of any "Fabricated Assembly" items. G. All millwork materials shall be free from defect impairing strength, durability, or appearance; straight and free from warpage; and the best grade for their particular function. All wood shall be well seasoned and kiln dried and shall have an average moisture content of 8%, a maximum of 10%, and a minimum of 5%. H. Plywood and other woodwork of treatable species, where required by code, shall be fire - retardant treated to result in a flame spread rating of 25 or less with no evidence of significant progressive combustion when tested for 30 minutes duration under ASTM E-84 and shall bear the testing laboratory mark on the surface to be concealed. M.