WORK PLANS - Laserfiche WebLink

Home Browse Search

FOOD SERVICE EQUIPMENT Section 11400 15-1207 2.5 PLUMBING TRIM, SINKS A. All vegetable and pot washing sinks or other 12" deep sinks shall have Fisher Mfg. Co. Model 22209 series (2" drain size) quick opening drain. Fisher Mfg. Co. Model 60100 splash mounted faucet shall be mounted over each partition as shown on the drawings. B. All cook sinks, pantry sinks or other 10" or 12" deep sinks shall have Fisher Mfg. Co. Model 22209 series (2" drain size or as shown on the drawings) quick opening drain. Fisher Mfg Co. Model 57649 faucets mounted as shown on the drawings. C. All Fisher Mfg., Co. faucets to be furnished as stainless steel to comply with AD1953 Standards and conform to NSF 61 Standard 9. D. Provide gas pressure regulators for installation by the Plumbing Contractor. E. FIRE SUPPRESSION GAS SHUT/OFF VALVE: Gas valve to be furnished by the Foodservice Equipment Contractor and furnished to the Plumbing Contractor for installation. Foodservice Equipment Contractor is to verify with plumbing division for gas line size. Valve to be located in an accessible location and if necessary with access panel. 2.6 HARDWARE A. Elevated shelf brackets shall be as shown on the Drawings. B. Drawer and door handles shall be as shown on the Drawings. C. Hinges for all metal doors shall be Klein Hardware Co. 7870 series, finished in satin chrome. PART 3 INSTALLATION 3.1 POSITIONING OF EQUIPMENT A. Installation procedure, details and scheduling shall be so arranged that the work of other contractors may progress without unnecessary delay, interference or damage. B. The Contractor shall do all fitting, joining, fastening, scribing, caulking and adjusting necessary to install any fixed item of equipment in its designated location; and shall locate and/or store portable, non -fixed items as directed by the Architect and/or Consultant with due regard for the security and protection from damage of the items involved. MPS TWTLOIV11148le10RiMIIN A. Commencement of work shall constitute agreement with and acceptance of all conditions as found. B. Equipment shall be installed as shown on the plans. Where abutting, curved or irregularly shaped angles or projecting corners of walls occur, equipment shall be made to conform. Where several pieces of equipment are to be assembled in a group, the group shall be complete as whole, with all necessary filler or connecting pieces as may be required to make a complete, sanitary and vermin -proof group. 11