SR0085076_OWTS - Laserfiche WebLink

Home Browse Search

11 Paul W. Donoho, R.E.H.S. #6227 (530) 701-9972 d oO&M COMMERCIAL Start-up & Operation Introduction Safety Precautions This section covers the start-up of an AdvanTex®-AXf 00 Treatment Before starting up,maintaining,or servicing any wastewater treatment System in a commercial application.The formal start-up of an AdvanTex system,observe the following precautions for the safety and heafth of all Treatment System should only be performed by trained personnel.As a service personnel working with or around wastewater,effluent,and its trained member of the team performing the system start-up,you play associated equipment: a critical role in the operation of the system.The decisions made at the •Wear proper clothing that covers all parts of the body that will be time of the start-up will determine the long-term maintenance needs exposed to wastewater or effluent. of the system.Regulators,manufacturers,dealers,property owners, • Wear personal protection equipment(PPQ such as rubber gloves neighbors,and service providers all rely on a thorough start-up. and eye protection when handling or touching any equipment Before you start your system,please read this entire manual,as well as components that come In contact with wastewater or effluent. the engineering plans,and contact your Dealer if you have any questions. • Tum off system power at the service entrance panel and set the You'll save yourself time and money,and you'll reduce the potential for circuit breakers in the panel to their"OFF'positions before removing any system components.If the control panel or service entrance follow-up work.For information specific to your system,refer to your panel is not within eyesight of the pumping system,use tock putf detailed engineering plans. Tag Out tags to ensure safety. We recommend following the flow path through the treatment train, •Avoid driving over any part of the wastewater treatment system if possible,when performing the system start-up,beginning at the unless it's been equipped to withstand vehicle traffic.ff the system is building outlets and ending at the final discharge point.By following this subject to possible traffic,put a barricade up to protect the system, start-up sequence,the treatment train can be effectively inspected for • Do not enter any tank access.Any work performed on the tank proper operation and each step in the process can be given systematic should be done from the outside.Gases and/or oxygen depletion in attention. the tank can be fatal. • Secure all tank access lids properly to the riser after all work is Roles and Responsibilities complete. Poor to start-up,the Orenw Representative orAdvanTex Dealer will • Practice proper personal hygiene at all times. contact the Designer,installer,and Service Provider to coordinate a start- up date.The date will be based on a status report provided by the Orenco Representative and the availability of all parties.The status report will include,but will not be limited to,verification of leak testing performed by the Installer,installation of all equipment,and the avallabriiry of power, phone line,and water at the site. • The AdvanTex Dealer is expected to be on site and is either performing the start-up or acting as a coordinator and general resource during the installation and start-up of the system. • The Designer is required at the site during start-up to answer questions concerning site-specific issues not covered in the plans, timer settings,and float settings. • The Installer is required at the site during start-up to address any installation issues that arise. • The Service Provider is required at the site during start-up to become familiar with the system,receive training on control panel and treatment system operation,and to learn correct sampling techniques for the system. Copyright Orenca Systems®,Inc�Properry of Crenco Systems®,inc.np not reproduce or distribute without written auihorizaUon from Crenco:B00-34B-9843. AIM-OM-ATY3,rtev.2.1,OS/T5