Laserfiche WebLink
Revised: 02/03/2023 2 <br />Job Steps Hazards Actions to Eliminate or Minimize Hazards RAC <br />Delineate exclusion zone(s) <br />2. Inspect area(s) where straw <br />wattles are to be placed <br />- Contact with underground utilities <br />could cause injury to worker and <br />damage to property or equipment. <br />1. Contact Dig Alert by dialing 811 to verify the location and <br />depth of existing utilities prior to starting any subsurface <br />disturbance activities. Review Geophysical surveys, site <br />historical information, maps and as-built drawings prior to <br />trencher operation. Note: By law, responses from the utility <br />owner are required before commencing the subsurface <br />disturbance activities. <br />L <br />Visually inspect areas and do not attempt to ascend steep slopes without the proper <br />fall protection.Where work boots with adequate tread and a raised heel. <br />3. Unloading of straw wattles - Sprains and Strains 1. Do not lift more than 50lbs. without using the "buddy system" <br />or mechanical means. For larger deliveries use a forklift or other <br />equipment to unload. <br />M <br />Use a forklift when unloading straw wattles. <br />NC-25-1137 Tiwana & Sons <br />1210 East Hammer Lane, Stockton, CA 95210