WORK PLANS - Laserfiche WebLink

Home Browse Search

SITE-SPECIFIC HEALTH AND SAFETY PLAN FOR PHASE II ENVIRONMENTAL SITE ASSESSMENT Emergency Response July 7, 2023 • Please see Section 1.6 for incident reporting procedures. 1.5.3 Death of an Individual or Hospitalization of Three or More Employees The emergency response procedures above will be followed. If the injured person dies, follow the incident reporting procedures. PRM will notify the Human Resources Department, local officials and coroner immediately. Human Resources will notify the local OSHA office within 8 hours of the incident or fatality in the event of a fatality or the hospitalization of three or more employees. 1.6 EMERGENCY RESPONSE PROCEDURES: SPILLS OR CUT LINES Prevent problems by documenting the location of underground lines (e.g., product, sewer, telephone, fiber optic) before starting site work. If a line or tank is drilled through, or another leak occurs, document the event as soon as possible using the Incident Investigation Report. In the event of a spill/release, follow this plan: • Stop Work, stabilize the situation, and secure the site. • Call Fire Department immediately if the spill cannot be contained or in case of fire or other emergency. • Stay upwind of the spill/release. • Wear appropriate PPE. • Turn off equipment and other sources of ignition. • Turn off pumps and shut valves to stop the flow/leak. • Plug the leak or collect drippings, when possible. • Use sorbent pads to collect product and impede its flow, if possible. • Notify the SHSO to begin the incident reporting procedures. All spills/releases will be reported to the Client Project Manager within 24 hours. • Determine if the client wants Stantec to repair the damage or if the client will use an emergency repair contractor. • Based on agreements, contact emergency spill contractor for containment of free product. The contacts for this project will be the local fire department and/or American Integrated Services (888)423-6060 or 911. Stantec 1.4