Laserfiche WebLink
Universal Health & Safety Plan <br /> For use on all high-risk,industrial and HAZWOPER projects <br /> Department of Toxic Substances Control <br /> Equipment decontamination will be performed over a bucket and/or <br /> tarp to prevent decontamination water from flowing onto the ground <br /> surface. Decontamination water will be handled as described in the <br /> workplan. <br /> Equipment Decontamination Procedures <br /> Type Equipment Decontamination Solution Procedure <br /> Drilling Augers Alconox Wet—Alconox Wash and Water Rinse <br /> Drilling crown and casing Alconox Wet—Alconox Wash and Water Rinse <br /> Interprobe and pump Alconox Wet—Alconox Wash and Water Rinse <br /> 2.9 Air Monitoring <br /> Depending on the contaminants of concern, the products used to perform the work, or third-party operations,sampling or <br /> monitoring may be required within the work area on site to detect the presence and relative levels of chemical or particulate <br /> hazards.The data collected throughout monitoring shall be used to determine the appropriate levels of PPE. Monitoring shall be <br /> in accordance with Exposure Monitoring Procedure S3AM-127-PR and specified in the work permit and/or THA for the tasks. <br /> Key elements of the procedure include: <br /> • Calibration of monitoring equipment and/or daily bump tests to verify calibrations and confirm alarm function. <br /> • Documenting the results of calibration and/or daily bump tests. <br /> • Documenting the results of monitoring activities. <br /> • Personal monitoring and result evaluation must be directed by a Certified Industrial Hygienist or Certified Safety <br /> Professional. <br /> 2.9.1 Real Time Exposure Measurements/Equipment <br /> Monitoring shall be performed within the work area on site to detect the presence and relative levels of toxic substances.The <br /> data collected throughout monitoring shall be used to determine the appropriate levels of PPE. Monitoring shall be conducted as <br /> specified in the work permit and THA as work is performed. All instrumentation needs to be rated intrinsically safe to prevent fire <br /> or explosion. <br /> Instrument Manufacturer/Model Substances Detected <br /> 0 Photo Ionization Detector(PID) ■ RAE Systems mini-RAE ■ Petroleum hydrocarbons <br /> ■ Photovac Microtip ■ Organic Solvents <br /> ■ HNu Model Hnu(min. 10.6 eV bulb) ■ Benzene with specific separation <br /> to be <br /> 0 Multi or 4 Gas Detectors ■ RAE Systems Multi-RAE ■ Lower Explosive Limit <br /> ■ Oxygen <br /> ■ Carbon Monoxide <br /> ■ Hydrogen Sulfide <br /> 0 Colorimetric tubes ■ RAE Hand Pump(LP-1200) ■ Vinyl Chloride <br /> Colorimetric tube range 0.1 -20 <br /> ppmv <br /> ©AECOM Restricted <br /> Universal Heath and Safety Plan Template(S4(DSC)AM-209-FM-C) 7 <br /> Revision 12 September 9,2021 <br /> PRINTED COPIES ARE UNCONTROLLED.CONTROLLED COPY IS AVAILABLE ON COMPANY INTRANET. <br />