Laserfiche WebLink
OPERATING CONTROLS - PORTION CONTROL ONLY <br />c. <br />a. <br />b. <br />e. <br />ADJUSTING DISPENSE VOLUMES <br />NOTE: The dispenser should be at operating temperature before setting dispense volumes. <br />1. <br />3. <br />4. <br />8 46819 043012 <br />BUNN <br />HEMINC.READr POWER <br />PORUON CONTROE DISPENSE <br />PUSH FOR AUTO STOP <br />HOLD FOR MANUAL DISPENSE <br />(a) VOLUME SELECTOR BUTTONS <br />Press and release the button corre­ <br />sponding to the Small, Medium, or <br />Large volume, to select the desired <br />amount of water to be dispensed. <br />Pressing a different button after a <br />cycle has been initiated does not <br />change the volume in progress. <br />(b) AUTO STOP/MANUAL DISPENSE <br />BUTTON <br />Press and release button to stop a <br />dispense cycle. Press and hold button <br />to dispense manually. <br />(c) HIDDEN PROGRAMMING BUTTON <br />(d) LED INDICATORS <br />(e) DISPENSE NOZZLE <br />Press and hold the hidden programming button (c) located under the ® next to the BUNN logo on the front <br />of the dispenser until the 3 LED's begin flashing from the left to the right. Release the button. <br />2. Place an empty graduated container under the dispense nozzle (e). <br />Press and release the batch size to be set (a). The LED's will stop flashing, and the LED over the button just <br />pressed will come on steady. Water will begin to dispense into the container. <br />When the desired amount of water is dispensed, press and release the same button (a). The water will stop <br />dispensing and the batch size is now set. <br />5. The LED's will begin flashing from left to right again. Repeat steps 2 thru 4 to set up the other batch sizes. <br />6. To exit the programming set up at any time, press and release the hidden button once (c). The dispenser is <br />now ready for use.